# Trouble Shooting Video

**URL:** <https://forum.inductiveautomation.com/t/trouble-shooting-video/3743>\
**Category:** Ignition\
**Created:** [December 13, 2011, 6:07pm UTC](https://forum.inductiveautomation.com/t/trouble-shooting-video/3743 "2011-12-13T18:07:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jim\_lapratt](https://avatars.discourse-cdn.com/v4/letter/j/cc9497/32.png) [@jim\_lapratt](https://forum.inductiveautomation.com/u/jim_lapratt)\
**Post date:** [December 13, 2011, 6:07pm UTC](https://forum.inductiveautomation.com/t/trouble-shooting-video/3743/1 "2011-12-13T18:07:13Z")

</div>

Not sure if this would be the right place to request this, but its where I put it…

I think a video added to the ignition series on trouble shooting some of the things would be good. Not really sure what you would put in it but a thought.

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [December 13, 2011, 6:12pm UTC](https://forum.inductiveautomation.com/t/trouble-shooting-video/3743/2 "2011-12-13T18:12:52Z")

</div>

That’s probably a good idea. I’ve thought for a while that there should be a full chapter for this in the user manual, but a video would be a good complement for that. Would probably be a 3 hour video, but still… 😆

I really really hope that sometime soon we’ll finally get around to making the new series of videos we have planned. I know Travis has a list of videos he wants made, I suspect there are likely a few on troubleshooting defined already.

Regards,