# Trying to use Ignition to work with Rockwell’s Studio 5000 Emulate. **URL:** \ **Category:** General Discussion\ **Created:** [August 14, 2020, 6:46pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746 "2020-08-14T18:46:12Z")\ **Posts on this page:** 15\ **Page:** 2
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 17, 2020, 7:42pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/21 "2020-08-17T19:42:50Z")
Try `tcp.port==4840` or whatever port FactoryTalk is using for OPC UA. If you don’t see any traffic you may need to make sure you’re selecting the right network adapter, or the loopback adapter if they are on the same machine and you’re connecting via localhost. ---
**Author:** ![Mark.Foltarz](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mark.Foltarz](https://forum.inductiveautomation.com/u/Mark.Foltarz)\ **Post date:** [August 17, 2020, 7:44pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/22 "2020-08-17T19:44:13Z")
OK looks like it is port 4990 ---
**Author:** ![Mark.Foltarz](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mark.Foltarz](https://forum.inductiveautomation.com/u/Mark.Foltarz)\ **Post date:** [August 17, 2020, 7:52pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/23 "2020-08-17T19:52:44Z")
I set the filter to tcp.port==4990. There was no traffic. I then recreated the connection in Ignition. Still no traffic observed ---
**Author:** ![Mark.Foltarz](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mark.Foltarz](https://forum.inductiveautomation.com/u/Mark.Foltarz)\ **Post date:** [August 17, 2020, 7:55pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/24 "2020-08-17T19:55:37Z")
OK I checked and I did not have local loopback Changed to the Loop Back adapter and I see traffic on tcp.port==4990 What would you like me to capture ? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 17, 2020, 7:59pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/25 "2020-08-17T19:59:48Z")
Start the capture and then do an edit/save on the connection in Ignition or just wait long enough that it has attempted to reconnect again. You should see among other things a GetEndpointsRequest and GetEndpointsResponse pair. edit: actually you may not be able to see what they are if you don’t have Wireshark configured to interpret 4990 as OPC UA, but if you have a bunch of back and forth traffic you can send it my way and I’ll see if it’s what is needed. ---
**Author:** ![Mark.Foltarz](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mark.Foltarz](https://forum.inductiveautomation.com/u/Mark.Foltarz)\ **Post date:** [August 17, 2020, 8:13pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/26 "2020-08-17T20:13:35Z")
OK I captured a block of data. I’m emailing you the file. ---
**Author:** ![Mark.Foltarz](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mark.Foltarz](https://forum.inductiveautomation.com/u/Mark.Foltarz)\ **Post date:** [August 18, 2020, 1:42pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/27 "2020-08-18T13:42:06Z")
Kevin, did the file I sent you contain any useful data ? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 18, 2020, 2:28pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/28 "2020-08-18T14:28:17Z")
I didn’t get an email from you yesterday. Maybe one of our mail filters gobbled it up? ---
**Author:** ![Mark.Foltarz](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mark.Foltarz](https://forum.inductiveautomation.com/u/Mark.Foltarz)\ **Post date:** [August 18, 2020, 3:16pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/29 "2020-08-18T15:16:13Z")
Did the file make it through ? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 18, 2020, 4:14pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/30 "2020-08-18T16:14:15Z")
No, I PM’d you a dropbox link you can upload to instead. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 18, 2020, 4:18pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/31 "2020-08-18T16:18:13Z")
Confirmed, the server is now legitimately sending a mismatched URI: ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/8/18634413b54ec36d05106775c96b88922fb8b1c0.png) It would be great if you could contact Rockwell about this. They may actually fix it since you are presumably a customer. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [August 18, 2020, 4:41pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/32 "2020-08-18T16:41:13Z")
Or modify the batch file to encode spaces in the subject alternate name as `%20` instead of removing them. Since it is a batch file, you’ll probably have to double the percent signs to avoid environment substitution. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 18, 2020, 4:52pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/33 "2020-08-18T16:52:20Z")
I don’t know if that will work, but it’s worth a shot. ---
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [August 18, 2020, 5:00pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/34 "2020-08-18T17:00:12Z")
> [@Kevin.Herron](#): > > They may actually fix it since you are presumably a customer. Ah, I needed a good laugh today. Thank you! 🙂 ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [August 18, 2020, 5:01pm UTC](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746/35 "2020-08-18T17:01:47Z")
FWIW, a near-future versions is going to have the ability to suppress this check on a per-connection basis, as well as disable client-side certificate validation all together on a per-connection basis, for connecting to those servers that just can’t get it together. In the past we’ve always been able to manage to get the server configured correctly somehow when this popped up but there’s been a couple cases now where that isn’t true. [Previous page](https://forum.inductiveautomation.com/t/trying-to-use-ignition-to-work-with-rockwell-s-studio-5000-emulate/37746.md?page=1)