# Twilio Module - more

**URL:** <https://forum.inductiveautomation.com/t/twilio-module-more/9142>\
**Category:** Ignition\
**Created:** [October 3, 2014, 6:45pm UTC](https://forum.inductiveautomation.com/t/twilio-module-more/9142 "2014-10-03T18:45:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![stan1](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@stan1](https://forum.inductiveautomation.com/u/stan1)\
**Post date:** [October 3, 2014, 6:45pm UTC](https://forum.inductiveautomation.com/t/twilio-module-more/9142/1 "2014-10-03T18:45:46Z")

</div>

In the gateway configuration for your Twilio account, why does the port need to be 80 in  
the Inbound section? It says it is the default, so you should be able to change to another port.

What if you are on a Windows Server and IIS is using port 80?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 3, 2014, 6:54pm UTC](https://forum.inductiveautomation.com/t/twilio-module-more/9142/2 "2014-10-03T18:54:30Z")

</div>

The inbound port is the port Twilio’s servers are going to use when they attempt to reach the gateway with an HTTP request. It’s 80 because:

1. That’s the default port for HTTP.
2. That’s Twilio’s default.
3. It’s not the expected case that your gateway is actually reachable on the internet, but instead that you’ve configured a router or something on the edge of your network to forward requests to the Ignition gateway on your local network.

If your gateway is actually reachable on the internet then you should set the inbound port to be the same port you’ve configured Ignition to run on.

---

<div class="post-metadata">

**Author:** ![stan1](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@stan1](https://forum.inductiveautomation.com/u/stan1)\
**Post date:** [October 3, 2014, 7:47pm UTC](https://forum.inductiveautomation.com/t/twilio-module-more/9142/3 "2014-10-03T19:47:05Z")

</div>

We are a hosting service, so our Ignition server is reachable from the internet.  
If we are using the Ignition default port of 8088, should the inbound port be set  
to 8088 in the Twilio account setup on the gateway? Edit: I see you have already  
answered this.

Is there any configuration work to be done on the Twilio side, since 8088 is not the  
default port for http?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 4, 2014, 1:24am UTC](https://forum.inductiveautomation.com/t/twilio-module-more/9142/4 "2014-10-04T01:24:27Z")

</div>

[quote=“stan@tripaga.com”]  
Is there any configuration work to be done on the Twilio side, since 8088 is not the  
default port for http?[/quote]

No, the module takes the configured public hostname and port then configures Twilio with a callback URL using those settings.