# Twilio Module

**URL:** <https://forum.inductiveautomation.com/t/twilio-module/9132>\
**Category:** Ignition\
**Created:** [October 2, 2014, 1:26am UTC](https://forum.inductiveautomation.com/t/twilio-module/9132 "2014-10-02T01:26:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![stan1](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@stan1](https://forum.inductiveautomation.com/u/stan1)\
**Post date:** [October 2, 2014, 1:26am UTC](https://forum.inductiveautomation.com/t/twilio-module/9132/1 "2014-10-02T01:26:13Z")

</div>

I installed the Twilio module and think I have it at least partially configured in the gateway.

It shows it is active and is setup for 2-way communication with the public ip address and port of my server.

How do I configure the on-call rosters to get the phone numbers to send the SMS messages to? I don’t see an option for that. I am trying to add this to the notification block in the Alarm Pipeline.

Hint: Some documentation would be great.

Ignition 7.7.1

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 2, 2014, 1:19pm UTC](https://forum.inductiveautomation.com/t/twilio-module/9132/2 "2014-10-02T13:19:39Z")

</div>

Rosters are part of the general alarming system and aren’t tied to any particular notification profile type. You can configure them on the gateway under Configure \> Alarming \> Rosters or in the client with the roster component. See [the user manual](https://support.inductiveautomation.com/usermanuals/ignition/on_call_rosters.htm?zoom_highlightsub=roster) for slightly more info.

I imagine Inductive University has some coverage on these topics now as well.

---

<div class="post-metadata">

**Author:** ![stan1](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@stan1](https://forum.inductiveautomation.com/u/stan1)\
**Post date:** [October 2, 2014, 3:51pm UTC](https://forum.inductiveautomation.com/t/twilio-module/9132/3 "2014-10-02T15:51:24Z")

</div>

Thanks for the information. I couldn’t find anything when I searched Inductive University on Twilio.

Is the format that Twilio is expecting +14333362571 or will it take 4333362571?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 2, 2014, 6:01pm UTC](https://forum.inductiveautomation.com/t/twilio-module/9132/4 "2014-10-02T18:01:44Z")

</div>

Yeah I’m not sure if the IALabs modules have any IU content right now.

I think either format for the number will work.

---

<div class="post-metadata">

**Author:** ![stan1](https://avatars.discourse-cdn.com/v4/letter/s/da6949/32.png) [@stan1](https://forum.inductiveautomation.com/u/stan1)\
**Post date:** [October 2, 2014, 11:53pm UTC](https://forum.inductiveautomation.com/t/twilio-module/9132/5 "2014-10-02T23:53:02Z")

</div>

Got the Twilio Module working. Support called and the port in the gateway configuration needed to be port 80. Also in contact information I needed to setup a type of sms with the phone number. It works with the phone number prefixed with 1+.