# UDT MultiSelect Editing Error

**URL:** <https://forum.inductiveautomation.com/t/udt-multiselect-editing-error/6579>\
**Category:** Ignition\
**Created:** [May 25, 2013, 1:03pm UTC](https://forum.inductiveautomation.com/t/udt-multiselect-editing-error/6579 "2013-05-25T13:03:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gadgetguru69](https://avatars.discourse-cdn.com/v4/letter/g/e274bd/32.png) [@gadgetguru69](https://forum.inductiveautomation.com/u/gadgetguru69)\
**Post date:** [May 25, 2013, 1:03pm UTC](https://forum.inductiveautomation.com/t/udt-multiselect-editing-error/6579/1 "2013-05-25T13:03:11Z")

</div>

Just wants to post this in case it has not been noticed to this point. If you try to do a multi select edit in a UDT then it errors out. If you tell it to proceed without committing changes then it appears to go ahead and make the changes.

Running 7.6 rc5

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/3/3997e73d9c1bc1c33eb48cc4eca84b8035c142ad.PNG)

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [May 31, 2013, 6:15pm UTC](https://forum.inductiveautomation.com/t/udt-multiselect-editing-error/6579/2 "2013-05-31T18:15:51Z")

</div>

Hi,

This has been fixed for 7.6.2. It was being caused by the alarm settings, when editing tags with different alarm configurations (inside of a udt).

Thanks for the report,