# Unable to Save

**URL:** <https://forum.inductiveautomation.com/t/unable-to-save/10999>\
**Category:** Ignition\
**Created:** [January 6, 2016, 3:05pm UTC](https://forum.inductiveautomation.com/t/unable-to-save/10999 "2016-01-06T15:05:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tebright1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/tebright1/32/87405_2.png) [@tebright1](https://forum.inductiveautomation.com/u/tebright1)\
**Post date:** [January 6, 2016, 3:05pm UTC](https://forum.inductiveautomation.com/t/unable-to-save/10999/1 "2016-01-06T15:05:18Z")

</div>

I am working on a project that appears to let me save a few times. Then after a while, it just sits there and says serializing window. After that goes away, when checking the Client, the new changes have not been applied. To deal with this, I have had to exit the designer and reopen it to make any more saves.

Anyone run into this?

---

<div class="post-metadata">

**Author:** ![accyroy](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/accyroy/32/3386_2.png) [@accyroy](https://forum.inductiveautomation.com/u/accyroy)\
**Post date:** [January 6, 2016, 3:17pm UTC](https://forum.inductiveautomation.com/t/unable-to-save/10999/2 "2016-01-06T15:17:55Z")

</div>

I did have this problem in 7.7.6rc1, it was fixed in the full release of 7.7.6 so I suggest upgrading to that if you can.