# Unconnected Devices Not Showing

**URL:** <https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024>\
**Category:** Ignition\
**Created:** [August 13, 2013, 12:23pm UTC](https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024 "2013-08-13T12:23:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![aidamcg](https://avatars.discourse-cdn.com/v4/letter/a/90db22/32.png) [@aidamcg](https://forum.inductiveautomation.com/u/aidamcg)\
**Post date:** [August 13, 2013, 12:23pm UTC](https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024/1 "2013-08-13T12:23:32Z")

</div>

Hi

In 7.6.2 the devices indicator on status page no longer shows when a device is not connected. Found it quite useful

Aidan

[attachment=0]Devices.PNG[/attachment]

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [August 13, 2013, 3:17pm UTC](https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024/2 "2013-08-13T15:17:44Z")

</div>

In 7.6 drivers no longer have a fixed set of states, so there’s no longer any such thing as being ‘disconnected’ that applies universally to any driver/device.

There may be something else I can use, however, I’ll do some investigating…

---

<div class="post-metadata">

**Author:** ![aidamcg](https://avatars.discourse-cdn.com/v4/letter/a/90db22/32.png) [@aidamcg](https://forum.inductiveautomation.com/u/aidamcg)\
**Post date:** [August 14, 2013, 6:10am UTC](https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024/3 "2013-08-14T06:10:49Z")

</div>

Hi

As a workaround I used the IA labs scripting module and built a screen with a table of all devices and their status.

Thanks

Aidan

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [August 14, 2013, 3:07pm UTC](https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024/4 "2013-08-14T15:07:11Z")

</div>

[quote=“aidamcg”]Hi

As a workaround I used the IA labs scripting module and built a screen with a table of all devices and their status.

Thanks

Aidan[/quote]

Ok, great. I’ll update this thread if/when something changes regarding the status page.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [September 23, 2013, 11:05pm UTC](https://forum.inductiveautomation.com/t/unconnected-devices-not-showing/7024/5 "2013-09-23T23:05:59Z")

</div>

This was done for 7.6.4