# Uniform Report Table Column width for Header, Detail, Summary

**URL:** <https://forum.inductiveautomation.com/t/uniform-report-table-column-width-for-header-detail-summary/63240>\
**Category:** Ignition\
**Created:** [August 20, 2022, 5:00pm UTC](https://forum.inductiveautomation.com/t/uniform-report-table-column-width-for-header-detail-summary/63240 "2022-08-20T17:00:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Keith\_Magill](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Keith\_Magill](https://forum.inductiveautomation.com/u/Keith_Magill)\
**Post date:** [August 20, 2022, 5:00pm UTC](https://forum.inductiveautomation.com/t/uniform-report-table-column-width-for-header-detail-summary/63240/1 "2022-08-20T17:00:57Z")

</div>

I am sure I am just overlooking a setting somewhere.  
Looking to develop a table that will be 13 columns for all three row types.

- Header
- Details
- Summary

While I can set the column count to 13 for all of them, there is no way that I can find to set them all to the same width. The “Column Width” field is greyed out (set to 10) but I cannot seem to either enable the ability or am looking in the wrong place…

Just looking to list some meter totalizers based on end of day… (00:00)

Any help would be greatly appreciated…

---

<div class="post-metadata">

**Author:** ![Paul\_Verbovshchuk](https://avatars.discourse-cdn.com/v4/letter/p/f0a364/32.png) [@Paul\_Verbovshchuk](https://forum.inductiveautomation.com/u/Paul_Verbovshchuk)\
**Post date:** [August 23, 2022, 10:04pm UTC](https://forum.inductiveautomation.com/t/uniform-report-table-column-width-for-header-detail-summary/63240/2 "2022-08-23T22:04:40Z")

</div>

You can use select the ‘sync row above’ property on all three row types and then move the summary row as desired to configure the column widths.

For reference: [Report - Table - Ignition User Manual 8.1 - Ignition Documentation](https://docs.inductiveautomation.com/display/DOC81/Report+-+Table)

---

<div class="post-metadata">

**Author:** ![Keith\_Magill](https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/32.png) [@Keith\_Magill](https://forum.inductiveautomation.com/u/Keith_Magill)\
**Post date:** [August 24, 2022, 4:58pm UTC](https://forum.inductiveautomation.com/t/uniform-report-table-column-width-for-header-detail-summary/63240/3 "2022-08-24T16:58:25Z")

</div>

Paul,  
Thanks for the feedback.  
I will apply that approach