# UNISEMS - Simulation Module for Ignition **URL:** \ **Category:** General Discussion\ **Created:** [September 9, 2015, 7:13pm UTC](https://forum.inductiveautomation.com/t/unisems-simulation-module-for-ignition/10445 "2015-09-09T19:13:53Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![PRAMANJ](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pramanj/32/66935_2.png) [@PRAMANJ](https://forum.inductiveautomation.com/u/PRAMANJ)\ **Post date:** [September 9, 2015, 7:13pm UTC](https://forum.inductiveautomation.com/t/unisems-simulation-module-for-ignition/10445/1 "2015-09-09T19:13:53Z")
What is your opinion on having Simulator for a plant. [poll type=multiple max=8] - It's a valuable tool for operator training for normal and emergency operation of plant for increased plant safety, security and efficiency. - Useful for new plants for design/testing and tuning of control system and SCADA system and operator readiness before/during and after plant commissioning. - Useful for migration projects from old to new Ignition based SCADA/control systems as complete SCADA and control system can be planned on Simulated plant first saving migration time. - Useful for decision making about migration to Ignition by implementing Ignition on Simulated plant to see the benifits of Ignition, operator readiness and reduce migration time. - Useful tool for training department of an existing Ignition based plant to get a better feel of the plant and control system behaviour under all possible plant conditions. - Can't say as we have no experience with Simulators, we have to try and see. - A good to have but not a must tool as ROI is not tangible. - Simulator is an overhead and avoidable cost to the plant. [/poll] Hi, We are pleased to announce Launch of [color=#408000]UNISEMS [/color]package as a Simulation module for Ignition. Please visit UNISEMS web site [http://www.unisems.com](http://www.unisems.com) for more details and a couple of introductory you tube videos for the package. We will be present in ICC-2015 at Folsom CA from 21st to 23rd Sept 2015 and will be glad to demonstrate and discuss the [color=#808000]ARSCADA [/color]and [color=#808000]UNISEMS [/color]modules with you. Please write to [info@pramanj.com](mailto:info@pramanj.com) to schedule a meeting during breaks in the conference. Best Regards PRAMANJ Technologies