# Urlproxy in Ignition Gateway **URL:** \ **Category:** Ignition\ **Tags:** ignition79\ **Created:** [November 20, 2017, 9:07pm UTC](https://forum.inductiveautomation.com/t/urlproxy-in-ignition-gateway/16059 "2017-11-20T21:07:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![ryanjmclaughlin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryanjmclaughlin/32/4318_2.png) [@ryanjmclaughlin](https://forum.inductiveautomation.com/u/ryanjmclaughlin)\ **Post date:** [November 20, 2017, 9:07pm UTC](https://forum.inductiveautomation.com/t/urlproxy-in-ignition-gateway/16059/1 "2017-11-20T21:07:59Z")
I found the URLProxy GW feature from this [post](http://forum.inductiveautomation.com/t/camera-issue-in-client/15714/2). This is awesome, as I route some WebServices (SUDS) through Ignition Gateway. Problem is, it seems to only support GET method. ```auto Exception: (405, u'HTTP method POST is not supported by this URL') ``` Are there any other ways to support POST methods so I can post SOAP messages through the Gateway? Original Post: [Camera Issue in Client](http://forum.inductiveautomation.com/t/camera-issue-in-client/15714/2): ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [November 20, 2017, 9:11pm UTC](https://forum.inductiveautomation.com/t/urlproxy-in-ignition-gateway/16059/2 "2017-11-20T21:11:28Z")
DIY with the web services module? ---
**Author:** ![ryanjmclaughlin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryanjmclaughlin/32/4318_2.png) [@ryanjmclaughlin](https://forum.inductiveautomation.com/u/ryanjmclaughlin)\ **Post date:** [November 20, 2017, 9:13pm UTC](https://forum.inductiveautomation.com/t/urlproxy-in-ignition-gateway/16059/3 "2017-11-20T21:13:06Z")
DUH! Yes, I suppose that would work. Let me try that.