# "Usable" Data Display in Powerchart

**URL:** <https://forum.inductiveautomation.com/t/usable-data-display-in-powerchart/112704>\
**Category:** Ignition\
**Created:** [December 9, 2025, 2:22pm UTC](https://forum.inductiveautomation.com/t/usable-data-display-in-powerchart/112704 "2025-12-09T14:22:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![EDoepke](https://avatars.discourse-cdn.com/v4/letter/e/eb9ed0/32.png) [@EDoepke](https://forum.inductiveautomation.com/u/EDoepke)\
**Post date:** [December 9, 2025, 2:22pm UTC](https://forum.inductiveautomation.com/t/usable-data-display-in-powerchart/112704/1 "2025-12-09T14:22:29Z")

</div>

I am wondering if anyone has found a way to make a “generic” Power Chart just easier to read multiple plots from. Upgrading customer from Wonderware to Ignition. Wonderware historical trend would basically automatically display the trend data visually as if it were 0-100% along Y-axis. This would result in easily being able to see a plot (like Filter Turbidity) for a tag scaled 0-1 against a plot (like Filter Flow) of 0-2500 GPM. Customer absolutely does not like the Autorange display, and without manually creating multiple axis configurations with the appropriate min/max, I am just stuck.

Basically, is it possible to set up the Power Chart to display all plots based on the min/max EU Scaling of the selected tag? This trending is the last “sticking point” with the customer. He absolutely LOVES Ignition over Wonderware from a reliability standpoint, but is getting pretty picky about the trending options. Thanks in advance for any insights offered.