# User Management

**URL:** <https://forum.inductiveautomation.com/t/user-management/18126>\
**Category:** Ignition\
**Created:** [May 23, 2018, 12:14am UTC](https://forum.inductiveautomation.com/t/user-management/18126 "2018-05-23T00:14:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rhettmotley](https://avatars.discourse-cdn.com/v4/letter/r/bbce88/32.png) [@rhettmotley](https://forum.inductiveautomation.com/u/rhettmotley)\
**Post date:** [May 23, 2018, 12:14am UTC](https://forum.inductiveautomation.com/t/user-management/18126/1 "2018-05-23T00:14:59Z")

</div>

User management component is disabled. I have enabled it in the gateway and it still does not work. V7.9.5. I have merged gateway changes, restarted the designer, restarted the gateway. It has to be simple… and I am just missing it.

Thanks

Rhett Motley

---

<div class="post-metadata">

**Author:** ![James.Lorenz](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/james.lorenz/32/3290_2.png) [@James.Lorenz](https://forum.inductiveautomation.com/u/James.Lorenz)\
**Post date:** [May 23, 2018, 1:10am UTC](https://forum.inductiveautomation.com/t/user-management/18126/2 "2018-05-23T01:10:31Z")

</div>

7.9.4 added Client Permissions for certain functionality, User Management being one of them. Make sure it’s enabled for the necessary roles/zones in the Project Properties of your project.

[https://docs.inductiveautomation.com/display/DOC79/Project+Properties#ProjectProperties-ClientPermissions](https://docs.inductiveautomation.com/display/DOC79/Project+Properties#ProjectProperties-ClientPermissions)

---

<div class="post-metadata">

**Author:** ![rhettmotley](https://avatars.discourse-cdn.com/v4/letter/r/bbce88/32.png) [@rhettmotley](https://forum.inductiveautomation.com/u/rhettmotley)\
**Post date:** [May 23, 2018, 2:02am UTC](https://forum.inductiveautomation.com/t/user-management/18126/3 "2018-05-23T02:02:07Z")

</div>

That was it. Thank you very much.