# User manual module

**URL:** <https://forum.inductiveautomation.com/t/user-manual-module/25492>\
**Category:** Ignition\
**Created:** [June 3, 2019, 9:07am UTC](https://forum.inductiveautomation.com/t/user-manual-module/25492 "2019-06-03T09:07:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![taglias](https://avatars.discourse-cdn.com/v4/letter/t/54ee81/32.png) [@taglias](https://forum.inductiveautomation.com/u/taglias)\
**Post date:** [June 3, 2019, 9:07am UTC](https://forum.inductiveautomation.com/t/user-manual-module/25492/1 "2019-06-03T09:07:06Z")

</div>

I cannot find the user manual module for any version. Is there any way to use the user manual offline, using the link on the gateway webpage, as I was used in the past?  
Even on the installation of version 8.0 there is no user manual module. Has it been removed definitely?

Thank you

---

<div class="post-metadata">

**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\
**Post date:** [June 3, 2019, 2:18pm UTC](https://forum.inductiveautomation.com/t/user-manual-module/25492/2 "2019-06-03T14:18:22Z")

</div>

Correct, there is no more user manual module. Trying to keep two completely different user manuals in sync was not working.