# User source, fail over source not working?

**URL:** <https://forum.inductiveautomation.com/t/user-source-fail-over-source-not-working/23568>\
**Category:** Ignition Early Access\
**Created:** [March 25, 2019, 2:39pm UTC](https://forum.inductiveautomation.com/t/user-source-fail-over-source-not-working/23568 "2019-03-25T14:39:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SBL\_MC](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sbl_mc/32/56813_2.png) [@SBL\_MC](https://forum.inductiveautomation.com/u/SBL_MC)\
**Post date:** [March 25, 2019, 2:39pm UTC](https://forum.inductiveautomation.com/t/user-source-fail-over-source-not-working/23568/1 "2019-03-25T14:39:28Z")

</div>

Tried to log with a fail over user on a restored 7.9 project with no luck. All settings seems to be OK.

Failover mode is set to soft.

---

<div class="post-metadata">

**Author:** ![Kurt.Larson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kurt.larson/32/6426_2.png) [@Kurt.Larson](https://forum.inductiveautomation.com/u/Kurt.Larson)\
**Post date:** [April 26, 2019, 8:56pm UTC](https://forum.inductiveautomation.com/t/user-source-fail-over-source-not-working/23568/2 "2019-04-26T20:56:20Z")

</div>

Are you still experiencing this behavior? If so, please reach out to [support@inductiveautomation.com](mailto:support@inductiveautomation.com), and reference this post. Thanks!