# Using Ignition to communicate and control an AX350i Domino inkjet printer **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [April 13, 2024, 3:42pm UTC](https://forum.inductiveautomation.com/t/using-ignition-to-communicate-and-control-an-ax350i-domino-inkjet-printer/88780 "2024-04-13T15:42:32Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 13, 2024, 7:26pm UTC](https://forum.inductiveautomation.com/t/using-ignition-to-communicate-and-control-an-ax350i-domino-inkjet-printer/88780/2 "2024-04-13T19:26:41Z")
This has significantly similar text (cut-and-pasted) from this topic two days ago: > [@Domino Printer ax350i control from Igniton](https://forum.inductiveautomation.com/t/domino-printer-ax350i-control-from-igniton/88716): > > Does anyone have an example they can share for setting labels on Domino Printers using Codenet commands? I setup the printer in Ignition using the TCP protocol on port 7000, with writeback enabled. Ignition created a few tags on its own when I did this(last received time, message, message bytes, writeable, writeable bytes). I'm assuming I put the commands in the writeable tag, and get feedback in the message tag but I tried entering commands in both ASCII and hex format and didn't see any chang… Are you the same person? --- _[View the full topic](https://forum.inductiveautomation.com/t/using-ignition-to-communicate-and-control-an-ax350i-domino-inkjet-printer/88780)._