# Using multiple values for Equal or Not Equal alarm modes

**URL:** <https://forum.inductiveautomation.com/t/using-multiple-values-for-equal-or-not-equal-alarm-modes/73556>\
**Category:** Ignition\
**Tags:** vision, ignition81\
**Created:** [May 10, 2023, 7:05pm UTC](https://forum.inductiveautomation.com/t/using-multiple-values-for-equal-or-not-equal-alarm-modes/73556 "2023-05-10T19:05:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![L\_F](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@L\_F](https://forum.inductiveautomation.com/u/L_F)\
**Post date:** [May 10, 2023, 7:05pm UTC](https://forum.inductiveautomation.com/t/using-multiple-values-for-equal-or-not-equal-alarm-modes/73556/1 "2023-05-10T19:05:02Z")

</div>

Is it possible to make an alarm with alarm mode **Equal** or **Not Equal** that evaluates a set of values? I'm monitoring an integer tag and would like to trigger an alarm on all values except 0 and 13.

---

<div class="post-metadata">

**Author:** ![djs](https://avatars.discourse-cdn.com/v4/letter/d/e47774/32.png) [@djs](https://forum.inductiveautomation.com/u/djs)\
**Post date:** [May 10, 2023, 7:14pm UTC](https://forum.inductiveautomation.com/t/using-multiple-values-for-equal-or-not-equal-alarm-modes/73556/2 "2023-05-10T19:14:49Z")

</div>

You could do a _On Condition_ alarm mode with an expression binding on the _Is Active_ field that would check if the value is anything but 0 and 13.