# Using SECS/GEM module in the Maker edition

**URL:** <https://forum.inductiveautomation.com/t/using-secs-gem-module-in-the-maker-edition/91050>\
**Category:** Maker\
**Created:** [May 29, 2024, 4:17am UTC](https://forum.inductiveautomation.com/t/using-secs-gem-module-in-the-maker-edition/91050 "2024-05-29T04:17:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pasakorn\_Tiwatthanon](https://avatars.discourse-cdn.com/v4/letter/p/94ad74/32.png) [@Pasakorn\_Tiwatthanon](https://forum.inductiveautomation.com/u/Pasakorn_Tiwatthanon)\
**Post date:** [May 29, 2024, 4:17am UTC](https://forum.inductiveautomation.com/t/using-secs-gem-module-in-the-maker-edition/91050/1 "2024-05-29T04:17:58Z")

</div>

Can I try using SECS/GEM module in the Maker edition ?  
I found the message: "Not eligible for use with Ignition Maker Edition" after downloading and installing the module to Ignition 8.1.39.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/f/c/fc43292a6b2b31c046fc7b543a202e742fe4dc4c.png)

If not, how do I try using the SECS/GEM module ?

---

<div class="post-metadata">

**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\
**Post date:** [May 29, 2024, 4:25am UTC](https://forum.inductiveautomation.com/t/using-secs-gem-module-in-the-maker-edition/91050/2 "2024-05-29T04:25:18Z")

</div>

Use Standard Edition and reset trial every 2 hours.

---

<div class="post-metadata">

**Author:** ![Pasakorn\_Tiwatthanon](https://avatars.discourse-cdn.com/v4/letter/p/94ad74/32.png) [@Pasakorn\_Tiwatthanon](https://forum.inductiveautomation.com/u/Pasakorn_Tiwatthanon)\
**Post date:** [May 29, 2024, 4:39am UTC](https://forum.inductiveautomation.com/t/using-secs-gem-module-in-the-maker-edition/91050/3 "2024-05-29T04:39:43Z")

</div>

Thank you!

But, how do I get the standard edition ?

---

<div class="post-metadata">

**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\
**Post date:** [May 29, 2024, 4:46am UTC](https://forum.inductiveautomation.com/t/using-secs-gem-module-in-the-maker-edition/91050/4 "2024-05-29T04:46:11Z")

</div>

You are selecting the version after a clean install of Ignition during commissioning.  
[Installing and Upgrading Ignition | Ignition User Manual (inductiveautomation.com)](https://www.docs.inductiveautomation.com/docs/8.1/getting-started/installing-and-upgrading)