# V7.5.6 Alert Summary Table Filtering

**URL:** <https://forum.inductiveautomation.com/t/v7-5-6-alert-summary-table-filtering/7979>\
**Category:** Ignition\
**Created:** [February 7, 2014, 8:07pm UTC](https://forum.inductiveautomation.com/t/v7-5-6-alert-summary-table-filtering/7979 "2014-02-07T20:07:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cgele](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cgele/32/3453_2.png) [@cgele](https://forum.inductiveautomation.com/u/cgele)\
**Post date:** [February 7, 2014, 8:07pm UTC](https://forum.inductiveautomation.com/t/v7-5-6-alert-summary-table-filtering/7979/1 "2014-02-07T20:07:47Z")

</div>

Is it possible to filter alerts from multiple tag paths with the Alert Summary Table?  
I have been looking through the manual and can’t seem to find anything one way or the other.

Thanks

---

<div class="post-metadata">

**Author:** ![drewdin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/drewdin/32/3363_2.png) [@drewdin](https://forum.inductiveautomation.com/u/drewdin)\
**Post date:** [February 11, 2014, 3:14pm UTC](https://forum.inductiveautomation.com/t/v7-5-6-alert-summary-table-filtering/7979/2 "2014-02-11T15:14:58Z")

</div>

you can filter the table, use the Display Path Filter in the property editor of the alarm status grid. It uses wilcards. try _Path/To?tags/_

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [April 28, 2014, 11:06pm UTC](https://forum.inductiveautomation.com/t/v7-5-6-alert-summary-table-filtering/7979/3 "2014-04-28T23:06:38Z")

</div>

The display path filter is only going to accept a single path.