# V7.7.7 Alarm UDT

**URL:** <https://forum.inductiveautomation.com/t/v7-7-7-alarm-udt/11455>\
**Category:** Ignition\
**Created:** [April 2, 2016, 3:34pm UTC](https://forum.inductiveautomation.com/t/v7-7-7-alarm-udt/11455 "2016-04-02T15:34:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jonathan\_Henebrey](https://avatars.discourse-cdn.com/v4/letter/j/7cd45c/32.png) [@Jonathan\_Henebrey](https://forum.inductiveautomation.com/u/Jonathan_Henebrey)\
**Post date:** [April 2, 2016, 3:34pm UTC](https://forum.inductiveautomation.com/t/v7-7-7-alarm-udt/11455/1 "2016-04-02T15:34:12Z")

</div>

Hi,

Alarm description and priority are not being called correctly by the alarm status table (shows display path and low priority irrespective of actual value) when used in a UDT. Works fine when it triggers off a stand alone tag.

Any suggestions.

This all worked fine before, but did a firmware update to the processor and seems to have screwed things up (or a version issue with ignition)

Using ControlLogix v21+ now.