# V8.1 perspective symbol (Feature-384)

**URL:** <https://forum.inductiveautomation.com/t/v8-1-perspective-symbol-feature-384/38705>\
**Category:** Ignition Early Access\
**Tags:** perspective\
**Created:** [September 15, 2020, 6:26pm UTC](https://forum.inductiveautomation.com/t/v8-1-perspective-symbol-feature-384/38705 "2020-09-15T18:26:35Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![victordcq](https://avatars.discourse-cdn.com/v4/letter/v/f6c823/32.png) [@victordcq](https://forum.inductiveautomation.com/u/victordcq)\
**Post date:** [December 15, 2021, 2:02pm UTC](https://forum.inductiveautomation.com/t/v8-1-perspective-symbol-feature-384/38705/15 "2021-12-15T14:02:51Z")

</div>

Ive had to answer this somewhere else a while ago,  
Its a bit more complicated ... idk if there is an easier way by now  
Check here:

> [@Symbol Factory animated symbol color change](https://forum.inductiveautomation.com/t/symbol-factory-animated-symbol-color-change/51753/6):
>
> you can put css transform animations on svgs. it will be a bit tricky to make this work tho. infact the animaton on the pump is already css based. [image] this is the best you can get with the pump from igntion. for some reason the blades are not blades but just lines, so you cant fill them… i guess you could increase the stroke-width a bit of the fans so then there are 8 smaller fans .pump\_centrifugal\_rotor\>g\>path:nth-child(1){fill:white;} .ia\_symbolComponent-pump-centrifugal{fill:grey;}

---

_[View the full topic](https://forum.inductiveautomation.com/t/v8-1-perspective-symbol-feature-384/38705)._