# Vertical Pipe Segments

**URL:** <https://forum.inductiveautomation.com/t/vertical-pipe-segments/15262>\
**Category:** Ignition\
**Created:** [September 6, 2017, 1:55pm UTC](https://forum.inductiveautomation.com/t/vertical-pipe-segments/15262 "2017-09-06T13:55:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tenyard](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tenyard](https://forum.inductiveautomation.com/u/tenyard)\
**Post date:** [September 6, 2017, 1:55pm UTC](https://forum.inductiveautomation.com/t/vertical-pipe-segments/15262/1 "2017-09-06T13:55:52Z")

</div>

I am just starting out with Ignition and I see in the manuals that the provided Pipe Segments can either be horizontal or vertical. From what I can see, I can only create horizontal pipes and I do not have an option to rotate them.

Can any shed some light on this?

---

<div class="post-metadata">

**Author:** ![MMaynard](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mmaynard/32/3366_2.png) [@MMaynard](https://forum.inductiveautomation.com/u/MMaynard)\
**Post date:** [September 6, 2017, 2:06pm UTC](https://forum.inductiveautomation.com/t/vertical-pipe-segments/15262/2 "2017-09-06T14:06:05Z")

</div>

Just resize the segment and it will change.

---

<div class="post-metadata">

**Author:** ![tenyard](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tenyard](https://forum.inductiveautomation.com/u/tenyard)\
**Post date:** [September 6, 2017, 2:09pm UTC](https://forum.inductiveautomation.com/t/vertical-pipe-segments/15262/3 "2017-09-06T14:09:56Z")

</div>

So it does! Thanks for the help.