# Vessel component issue **URL:** \ **Category:** Ignition\ **Tags:** ignition81, perspective\ **Created:** [September 15, 2022, 1:15pm UTC](https://forum.inductiveautomation.com/t/vessel-component-issue/64114 "2022-09-15T13:15:43Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![victordcq](https://avatars.discourse-cdn.com/v4/letter/v/f6c823/32.png) [@victordcq](https://forum.inductiveautomation.com/u/victordcq)\ **Post date:** [September 15, 2022, 1:45pm UTC](https://forum.inductiveautomation.com/t/vessel-component-issue/64114/2 "2022-09-15T13:45:50Z")
Someone else had this too > [@Vessel visualization error when upgrading to 8.1.16](https://forum.inductiveautomation.com/t/vessel-visualization-error-when-upgrading-to-8-1-16/58804): > > I have discovered that the Vessel symbol has stopped displaying correctly since I updated to version 8.1.16 (starting from a version 8.1.14). The vessel level is displayed outside the tank perimeter, offset below its actual value. (Attached image) I’m not sure if it’s a bug or if I did something wrong during the update as in a “clean” install seems to work properly. Any help on how to fix it would be appreciated! Seems like it should have been fixed in 8.1.18 > [@Perspective Symbol Vessel Graphic problem](https://forum.inductiveautomation.com/t/perspective-symbol-vessel-graphic-problem/59856): > > Ignition 8.1.17 see the picture [tank] --- _[View the full topic](https://forum.inductiveautomation.com/t/vessel-component-issue/64114)._