# View init gets stuck in maker edition **URL:** \ **Category:** Maker\ **Created:** [January 19, 2023, 10:21am UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781 "2023-01-19T10:21:46Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 19, 2023, 10:21am UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/1 "2023-01-19T10:21:46Z")
Hi, When I create a view in my designer, it gets stuck in initializing it. ![designer view init error](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/8/188b153593b7353d17dff0cb7e46de7e625e4531.png) ---
**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\ **Post date:** [January 19, 2023, 5:32pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/2 "2023-01-19T17:32:13Z")
What version are you using? Does this happen every time you try to create a View? Is the behavior different if you remove the space from the name? Is the Gateway on this computer, or a different machine? Have you verified you can reach the Gateway from this computer? ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 19, 2023, 7:32pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/3 "2023-01-19T19:32:43Z")
![designer version](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/7/3735bb6a01528dfcce93f1a73b2a3b86a9ef2e4f.png) Yes it happens every time I try to create a view. No improvement removing the space from the name. The Gateway runs on a synology NAS Yes I can reach the gateway because my OPC sources are updated on my designer. Thanks for your help. ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [January 19, 2023, 7:40pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/4 "2023-01-19T19:40:01Z")
Can you copy the full text in the 'Output Console' window and paste or upload it here? There's likely an issue with the embedded browser starting up. ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 3:49pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/5 "2023-01-20T15:49:24Z")
[ouput console.txt](https://forum.inductiveautomation.com/uploads/short-url/gRK46K4c3AvGEDyxtMbyTkFrpD0.txt) (4.4 KB) ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [January 20, 2023, 4:13pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/6 "2023-01-20T16:13:52Z")
That's not complete, or you cleared it before you copied it. Can you get one from a 'clean' restart of the designer? ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 4:19pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/7 "2023-01-20T16:19:09Z")
Sorry. Here is the full one: [ouput console.txt](https://forum.inductiveautomation.com/uploads/short-url/o5yg4Hz7fUabpANADrCFFuCf7p4.txt) (5.8 KB) ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [January 20, 2023, 4:20pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/8 "2023-01-20T16:20:31Z")
Well, it's not an error from the browser library in the client. Can you check the gateway logs as well? > **[Obtaining Ignition Logs](https://support.inductiveautomation.com/hc/en-us/articles/360047151692-Obtaining-Ignition-Logs#gateway-log)** > > When troubleshooting or monitoring an Ignition system, it is very important to make a good use of logs. This article goes over the purpose of various Ignition logs and explains how to obtain them. > ... ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 5:27pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/9 "2023-01-20T17:27:43Z")
The gateway log is too big to transfer and contains only opc events. However, here is a new designer outpu console that shows errors on view init: [ouput console.txt](https://forum.inductiveautomation.com/uploads/short-url/787maKSZgATFuPKLnksgSeGEBaA.txt) (25.5 KB) ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [January 20, 2023, 5:33pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/10 "2023-01-20T17:33:28Z")
Those errors are just symptomatic of the root cause, which is that your designer isn't able to launch the 'design' webpage due to a 400 error. I was hoping the gateway logs would indicate something about that 400 when it was happening. At this point, your best bet is probably to contact support ([https://support.inductiveautomation.com](https://support.inductiveautomation.com)). A wild guess is that maybe something's messed up in the Perspective module; you could try uninstalling the module and installing a freshly downloaded copy (with the correct platform version) from our website: [Archived Ignition Releases | Inductive Automation](https://inductiveautomation.com/downloads/archive/8.1.23) Have you restarted the gateway since this started happening? ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 5:46pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/11 "2023-01-20T17:46:29Z")
yes I have restarted the gateway. Support does not cover the Maker Edition. I will try to unistall the designer and install it again. Thanks for your help any way ---
**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\ **Post date:** [January 20, 2023, 5:47pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/12 "2023-01-20T17:47:24Z")
> [@Jean-Marc\_Brenot](#): > > The Gateway runs on a synology NAS Is this through a Linux VM that you've setup on the Synology (and then installed Ignition), or other means? It might be helpful to know the nuance of the installation (including if there is anything else "in front" of it). ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 5:59pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/13 "2023-01-20T17:59:10Z")
I installed it with docker latest image ---
**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\ **Post date:** [January 20, 2023, 7:34pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/14 "2023-01-20T19:34:31Z")
There should be more detail in a settings export for your Synology docker container, e.g. (this is DSM6 on DS1815+): ![synology docker settings export3](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/c/6c15d8e366f8d0cbaf108734c3df7868de7ca59a.gif) The resultant JSON should have useful details on how you've configured the container. Ultimately, I think you shouldn't probably have a lot of errors in the container logs (you mention they're filled with OPC errors?) if things are working as expected--you might just need to zip them before uploading here (they'll squash down pretty well to likely fit under the size limits on the forum). ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 7:50pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/15 "2023-01-20T19:50:29Z")
Here is the zipped json 🙂 [inductiveautomation-ignition1.zip](https://forum.inductiveautomation.com/uploads/short-url/5vxTscGW5rqm0pM5oQ0ypPwHkmS.zip) (861 Bytes) ---
**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\ **Post date:** [January 20, 2023, 8:15pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/16 "2023-01-20T20:15:02Z")
In reviewing that, it looks like you've got a reverse proxy in front of Ignition (presumably what is listening at your `192.168.0.52` address and forwarding into your container). That is likely what is giving your Designer the _400/Bad Request_ error. Unfortunately, I've no experience with DSM7 and its reverse proxy capabilities/configuration. Most likely scenario is that it isn't properly handling WebSockets if I had to guess. ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 8:24pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/17 "2023-01-20T20:24:40Z")
Yes indeed. I configured the dsm 7 reverse proxy to connect to the ignition docker. Do you know which ip ans port is using designer to init views on the gateway? ---
**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\ **Post date:** [January 20, 2023, 8:31pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/18 "2023-01-20T20:31:15Z")
Everything goes through the same 8088 (or 8043 if using SSL/TLS). On an NGINX configuration, you'd want to make sure that the Connection and Upgrade headers are passed through to the backend, e.g.: ```auto ... proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection "Upgrade"; ... ``` ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 20, 2023, 8:48pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/19 "2023-01-20T20:48:30Z")
Ok thanks. I will check. See you ---
**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\ **Post date:** [January 21, 2023, 11:07pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/20 "2023-01-21T23:07:04Z")
Hi, I configured the 2 headers on my DSM reverse proxy. Unfortunately, there is no improvement. But the designer api call uses my gateway internal ip address, not my Internet domain one. Do you really think the reverse proxy has something to do with my problem ? [Next page](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781.md?page=2)