# View init gets stuck in maker edition

**URL:** <https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781>\
**Category:** Maker\
**Created:** [January 19, 2023, 10:21am UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781 "2023-01-19T10:21:46Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![kcollins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kcollins/32/19646_2.png) [@kcollins](https://forum.inductiveautomation.com/u/kcollins)\
**Post date:** [January 22, 2023, 5:24pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/21 "2023-01-22T17:24:26Z")

</div>

You might try configuring the public address settings:  
[https://docs.inductiveautomation.com/display/DOC81/Web+Server+Settings#WebServerSettings-PublicHTTPAddresssettings](https://docs.inductiveautomation.com/display/DOC81/Web+Server+Settings#WebServerSettings-PublicHTTPAddresssettings)

Additionally, take a look at the _Use Proxy Forwarded Headers_ option to further optimize your setup behind a reverse proxy (by having Ignition implicitly "trust" the headers set by your reverse proxy in order to reflect the true client IP address instead of that of the reverse proxy itself).

---

<div class="post-metadata">

**Author:** ![Jean-Marc\_Brenot](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jean-Marc\_Brenot](https://forum.inductiveautomation.com/u/Jean-Marc_Brenot)\
**Post date:** [January 23, 2023, 10:58am UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/22 "2023-01-23T10:58:04Z")

</div>

Hi,

I configured the public address:

 ![Gateway public addresses](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/8/38fcbe49b89084e7e2653630b9e163b12cb2afcc.png)

My SSL certificate is recorded on my gateway:

 ![gateway certificate](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/2/a2e5e24356bef032a574bcef600464ae8d1aa41d.png)

I registers it as trusted certificate on my designer, but when I add the https address of my gateway, I get this error message:

 ![designer certificate error](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/8/18590b4ed526496b75edcd318a82ab65ce4b90c7.png)

Last, my problem is still there.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [January 23, 2023, 12:54pm UTC](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781/23 "2023-01-23T12:54:54Z")

</div>

When using SSL, your public address configured in Ignition must be something named in the certificate, or an IP address identified in the certificate as an alternate. Your configured public address does not match the screenshot of your certificate.

[Previous page](https://forum.inductiveautomation.com/t/view-init-gets-stuck-in-maker-edition/68781.md?page=1)