# View Not Found No view configured for this page **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [June 23, 2022, 5:31pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125 "2022-06-23T17:31:12Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Michael\_Smith](https://avatars.discourse-cdn.com/v4/letter/m/df788c/32.png) [@Michael\_Smith](https://forum.inductiveautomation.com/u/Michael_Smith)\ **Post date:** [June 23, 2022, 5:31pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/1 "2022-06-23T17:31:12Z")
Hi As the subject says, I’m getting a ‘View Not Found No view configured for this page’ error when I try to launch a perspective session from the designer. I can’t figure out why. Everything appears to be configured properly… ![project view setting](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/8/d8134a694834a04e9bbfb8e76e51dff8b7dc9542.jpeg) Security is set to public. Don’t know what else to look for. Any ideas? Thanks! ---
**Author:** ![josborn](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@josborn](https://forum.inductiveautomation.com/u/josborn)\ **Post date:** [June 23, 2022, 5:43pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/2 "2022-06-23T17:43:04Z")
I think you need to hit the save button. ---
**Author:** ![Michael\_Smith](https://avatars.discourse-cdn.com/v4/letter/m/df788c/32.png) [@Michael\_Smith](https://forum.inductiveautomation.com/u/Michael_Smith)\ **Post date:** [June 23, 2022, 6:34pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/3 "2022-06-23T18:34:13Z")
Ok, that’s totally not cool. 🤣 So do you need to hit save every single time before you launch? Cause I’ve saved it numerous times… ---
**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\ **Post date:** [June 23, 2022, 6:39pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/4 "2022-06-23T18:39:18Z")
> [@Michael\_Smith](#): > > So do you need to hit save every single time before you launch? Only when you've made changes that haven't yet been saved. ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [June 23, 2022, 8:43pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/5 "2022-06-23T20:43:28Z")
> [@lrose](#): > > Only when you’ve made changes that haven’t yet been saved. Lol... 😂 ---
**Author:** ![tupanaster](https://avatars.discourse-cdn.com/v4/letter/t/5daacb/32.png) [@tupanaster](https://forum.inductiveautomation.com/u/tupanaster)\ **Post date:** [September 18, 2023, 8:38am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/7 "2023-09-18T08:38:44Z")
Have anyone experienced a "view Not Found" on a home screen that is correctly configured and has been working for the past days? I'm not losing page configurations like in this threads: > [@\[IGN-7712\] Losing Perspective Page URL Configuration](https://forum.inductiveautomation.com/t/ign-7712-losing-perspective-page-url-configuration/67468): > > I randomly lose the perspective page url link configuration once every 1-2 months. It just goes blank and every link is broken. I have to restore from a project backup. Has anyone else faced this issue? Any idea what could cause it or how to fix it? > [@Page Configuration Disappearing in Designer?](https://forum.inductiveautomation.com/t/page-configuration-disappearing-in-designer/53868): > > Has anyone come across their perspective page configurations Disappearing after opening the designer? The page configs are still active in the back end (Can launch sessions correctly…) Takes 1 - 2 ReLaunches and it comes good. V8.1.12 Windows 10 > [@\[BUG\] Page config "pages" dictionary emptied. Page Configuration lost](https://forum.inductiveautomation.com/t/bug-page-config-pages-dictionary-emptied-page-configuration-lost/61130): > > I ran into a bug on a project where the page configuration file (\Inductive Automation\Ignition\data\projects\myProject\com.inductiveautomation.perspective\page-config\config.json) reverted to no pages configured. I am not sure what happened or when it happened because auditing had not been set up. Since I don’t know exactly when it happened, the wrapper logs are not enough to tell what caused the problem. Reaching out to Support, the person thought that perhaps the project that it inherits f… But it's just not opening the configured view (after saving 😆) ---
**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\ **Post date:** [September 18, 2023, 3:09pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/8 "2023-09-18T15:09:51Z")
Are you able to provide screenshots which display the Page Configuration, as well as the View resource within the Project structure? The obvious culprits are likely a typo or a mis-placed backslash character. ---
**Author:** ![tupanaster](https://avatars.discourse-cdn.com/v4/letter/t/5daacb/32.png) [@tupanaster](https://forum.inductiveautomation.com/u/tupanaster)\ **Post date:** [September 19, 2023, 6:37am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/9 "2023-09-19T06:37:38Z")
Thumbs down to me 👎 Someone in the team added and deleted a view that used the same address as the home screen `/` I didn't notice that when I first checked. ---
**Author:** ![Sandip\_Tiwari](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@Sandip\_Tiwari](https://forum.inductiveautomation.com/u/Sandip_Tiwari)\ **Post date:** [June 6, 2024, 5:39am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/10 "2024-06-06T05:39:58Z")
why it is showing the View Not Found No view configured for this page. ![ignition error123](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/3/438d8297efa575d6f5b539d95eef19185aec65b3.png) even though I have provided the view ---
**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\ **Post date:** [June 6, 2024, 3:34pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/11 "2024-06-06T15:34:17Z")
Because you used a space in the URL configuration. That's a big no-no. Spaces in names in general is frowned upon and highly discouraged. Remove any spaces, update the names in use as needed, then try again. If you continue to encounter the issue, provide screenshots of the Page Configuration for this particular page, and the View you expect to be used as it exists within the Project Browser. ---
**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\ **Post date:** [June 7, 2024, 2:45am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/12 "2024-06-07T02:45:44Z")
I would have thought it'd be more the use of `)` and/or `.` as spaces in ignition page urls are automatically replaced by their url encoded character code %20 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/c/3cd0f2272dd35fe1b3f014148f3e37afbcb51c1c.png) ---
**Author:** ![Sandip\_Tiwari](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@Sandip\_Tiwari](https://forum.inductiveautomation.com/u/Sandip_Tiwari)\ **Post date:** [June 7, 2024, 5:07am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/13 "2024-06-07T05:07:38Z")
Thanks Cmallonee Sir ---
**Author:** ![Sandip\_Tiwari](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@Sandip\_Tiwari](https://forum.inductiveautomation.com/u/Sandip_Tiwari)\ **Post date:** [June 7, 2024, 2:25pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/15 "2024-06-07T14:25:03Z")
Sir I have done the same thing as you told me but it showing the same error ![error](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/d/5dd26beb0317bd7a5de25a6ebe750048d8e44ee3.png) ![error 2](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/6/860184cec3e799aeb9035b11096b0d826cfc29fc.png) so how to resolve this issue ---
**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\ **Post date:** [June 7, 2024, 2:26pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/16 "2024-06-07T14:26:12Z")
Yah, I think @nminchin may have been correct. Brush up on URL rules - many characters are not allowed. We still need to see the Page Configuration for this page. I don't mean the Navigation Event configuration, I mean the panel where you configure URLs for the project. We also need to see the View's location within the Project Browser panel (file directory). ---
**Author:** ![Sandip\_Tiwari](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@Sandip\_Tiwari](https://forum.inductiveautomation.com/u/Sandip_Tiwari)\ **Post date:** [June 11, 2024, 8:18am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/17 "2024-06-11T08:18:08Z")
Thanks cmallonee sir it's started working . ---
**Author:** ![Eike\_H](https://avatars.discourse-cdn.com/v4/letter/e/b38774/32.png) [@Eike\_H](https://forum.inductiveautomation.com/u/Eike_H)\ **Post date:** [August 5, 2025, 7:55am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/18 "2025-08-05T07:55:02Z")
I am getting the same problem for an inherited project ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/3/a372c8b618b0674fdb50baf07649878c835bdc35.png) it just not showing up in the Page Configuration ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/2/a2d2346fe4bbf4e0bd0cc4b68b1557079ff18334.png) ---
**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\ **Post date:** [August 5, 2025, 3:31pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/19 "2025-08-05T15:31:16Z")
If you change the URL for the page in question from `/reports` to `/zreports`, does it work then? ---
**Author:** ![Eike\_H](https://avatars.discourse-cdn.com/v4/letter/e/b38774/32.png) [@Eike\_H](https://forum.inductiveautomation.com/u/Eike_H)\ **Post date:** [August 11, 2025, 11:24am UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/20 "2025-08-11T11:24:21Z")
No, it does unfortunately not. Strange is that it is vible in the browser in the child project but not in parent although i am exporting to the parent…. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [August 11, 2025, 4:19pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/21 "2025-08-11T16:19:07Z")
How are you testing that it is not working via the parent? (You cannot run parent projects–only leaf projects.) ---
**Author:** ![Eike\_H](https://avatars.discourse-cdn.com/v4/letter/e/b38774/32.png) [@Eike\_H](https://forum.inductiveautomation.com/u/Eike_H)\ **Post date:** [September 1, 2025, 1:14pm UTC](https://forum.inductiveautomation.com/t/view-not-found-no-view-configured-for-this-page/61125/22 "2025-09-01T13:14:46Z")
Hey, sorry for my late reply: I went into the Parent inside the designer and it was not visible.