# Vision Alarm Status Table - only show one alarm per tag

**URL:** <https://forum.inductiveautomation.com/t/vision-alarm-status-table-only-show-one-alarm-per-tag/33794>\
**Category:** Ignition\
**Created:** [April 8, 2020, 5:59pm UTC](https://forum.inductiveautomation.com/t/vision-alarm-status-table-only-show-one-alarm-per-tag/33794 "2020-04-08T17:59:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![john.glynn](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/john.glynn/32/17348_2.png) [@john.glynn](https://forum.inductiveautomation.com/u/john.glynn)\
**Post date:** [April 8, 2020, 5:59pm UTC](https://forum.inductiveautomation.com/t/vision-alarm-status-table-only-show-one-alarm-per-tag/33794/1 "2020-04-08T17:59:32Z")

</div>

Is it possible for the vision alarm status table to only show one alarm per tag. The table already filters for a certain group of tags defined by a UDT. The UDT tag only has one alarm but I want the alarm status table to only have 1 row per tag, in that I want to see an alarm that is cleared and unacknowledged, however, if that alarm was to go active again, I want to only see a row for the active and unacknowledged alarm, and the cleared but unacknowledged alarm I want to see disappear (or acknowledged so it disappears). I have tried to use the tag event scripts but for some reason system.alarm.acknowledge doesn’t seem to work in that script. If i copy what I have in the tag event script, and run it in the script console, it works fine so I don’t think it is a syntax problem.