# Vision Alarm VOIP Notification Script just say "desk"

**URL:** <https://forum.inductiveautomation.com/t/vision-alarm-voip-notification-script-just-say-desk/86827>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [March 5, 2024, 2:36pm UTC](https://forum.inductiveautomation.com/t/vision-alarm-voip-notification-script-just-say-desk/86827 "2024-03-05T14:36:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brad\_Niemi1](https://avatars.discourse-cdn.com/v4/letter/b/ecd19e/32.png) [@Brad\_Niemi1](https://forum.inductiveautomation.com/u/Brad_Niemi1)\
**Post date:** [March 5, 2024, 2:36pm UTC](https://forum.inductiveautomation.com/t/vision-alarm-voip-notification-script-just-say-desk/86827/1 "2024-03-05T14:36:31Z")

</div>

I am using the Alarm Notification module for a VOIP notification. The script for the outgoing alarm script just comes across as "desk".  
This is the default script that I am using.

**\> At {eventTime|hh:mm:ss}, alarm named {name} became {eventState} with a value of {eventValue}**

How do i set this up to annunciate the actual alarm? I looked for any help in the University and Help. I am using a UDT for my alarms.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/c/2c73dbb8bcea78b9880c660e10693482fca26aa0.png)

and the name that should be going out is  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/4/04bd8c2fb27bb653ca9f80c4ee06efc9a771ae7b.png)