# Vision can I set visibility on individual components

**URL:** <https://forum.inductiveautomation.com/t/vision-can-i-set-visibility-on-individual-components/100142>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [December 22, 2024, 8:28pm UTC](https://forum.inductiveautomation.com/t/vision-can-i-set-visibility-on-individual-components/100142 "2024-12-22T20:28:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nicole\_McCormack](https://avatars.discourse-cdn.com/v4/letter/n/b77776/32.png) [@Nicole\_McCormack](https://forum.inductiveautomation.com/u/Nicole_McCormack)\
**Post date:** [December 22, 2024, 8:28pm UTC](https://forum.inductiveautomation.com/t/vision-can-i-set-visibility-on-individual-components/100142/1 "2024-12-22T20:28:31Z")

</div>

I can't find any way to change the visibility of individual components on the screen. Specifically I want to show 1 picture or the other based on user input for workflow type (which button they click to open the next screen).  
Is there anyway to change the visibility in this manner. I created two memory tags that get set based in which button is pressed. But I can't figure out how to bind the visibility of the image to the appropriate memory tag.  
I can't bind the enable either.

---

<div class="post-metadata">

**Author:** ![michael.flagler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/michael.flagler/32/26272_2.png) [@michael.flagler](https://forum.inductiveautomation.com/u/michael.flagler)\
**Post date:** [December 22, 2024, 8:59pm UTC](https://forum.inductiveautomation.com/t/vision-can-i-set-visibility-on-individual-components/100142/2 "2024-12-22T20:59:25Z")

</div>

You should be able to. Mind sharing some screenshots of how you have this all set up?

---

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [December 23, 2024, 12:53am UTC](https://forum.inductiveautomation.com/t/vision-can-i-set-visibility-on-individual-components/100142/3 "2024-12-23T00:53:19Z")

</div>

> [@Nicole\_McCormack](#):
>
> two memory tags

Boolean client tags?

If the Vision property editor is not visible in the designer, it can be found here:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/7/27cf2596363119b768bfa8f6af12a4e6555b6d4b.png)

**The most common gotcha is this:**

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/2/e23a0c9cf36e1a0502ecc14fbbbcf925b16c1b6c.png)

Make sure the property filter is set to **All**

Then, find the **visible** property and click the binding icon:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/5/7530e2b3a9b5ba6a39d6bdd415cbf43f45d09381.png)

In the binding editor popup, select **tag** , and then, navigate to the boolean tag using the Vision Client Tags folder tree to complete the binding.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/4/34f14f6e24e66695f5e1dc77d758a18d3cbe0d3e.png)

---

<div class="post-metadata">

**Author:** ![Nicole\_McCormack](https://avatars.discourse-cdn.com/v4/letter/n/b77776/32.png) [@Nicole\_McCormack](https://forum.inductiveautomation.com/u/Nicole_McCormack)\
**Post date:** [December 23, 2024, 2:43pm UTC](https://forum.inductiveautomation.com/t/vision-can-i-set-visibility-on-individual-components/100142/4 "2024-12-23T14:43:13Z")

</div>

You are a life saver!!! Thank you so much. It was the "all" common gotcha. I kept trying to get to it all these ways but not getting there. Tried figuring out how to script it into compliance but no joy.  
I was afraid I'd have to make a zillion different copies of basically the same screen with one thing changed at a time.  
It made no sense.