# Vision Chart - Multiple markers and movable **URL:** \ **Category:** General Discussion\ **Tags:** perspective, vision\ **Created:** [July 2, 2024, 3:12pm UTC](https://forum.inductiveautomation.com/t/vision-chart-multiple-markers-and-movable/92689 "2024-07-02T15:12:41Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [July 2, 2024, 4:09pm UTC](https://forum.inductiveautomation.com/t/vision-chart-multiple-markers-and-movable/92689/2 "2024-07-02T16:09:34Z")
It is complex. I have a 3rd party module that makes this relatively easy: > [@NoteChart Module v2 with Reporting](https://forum.inductiveautomation.com/t/notechart-module-v2-with-reporting/61404): > > Automation Professionals is pleased to announce a release candidate for its NoteChart Module, now with support for annotations on charts in the Reporting module. This module determines if either Vision or Reporting is installed (or both) and adds its components to the corresponding designer palettes. The new ReportNoteChart component functions like the native [Timeseries Chart](https://docs.inductiveautomation.com/display/DOC81/Report+Charts#ReportCharts-TimeseriesChart), but with the data key property and other properties needed to display timestamped annotations. Documentation is [here](https://www.automation-pros.com/notechart/doc/index.html). … With this module, you would set one marker timestamp in the `notes` dataset property to show a reference timestamp, then use the chart's (revamped) XTrace mode to control the 2nd timestamp. Both would be true Ignition datetime values that you can then feed to the historian to get the detailed information for the timespan. --- _[View the full topic](https://forum.inductiveautomation.com/t/vision-chart-multiple-markers-and-movable/92689)._