# Vision classic chart sub plot

**URL:** <https://forum.inductiveautomation.com/t/vision-classic-chart-sub-plot/91971>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [June 17, 2024, 7:16pm UTC](https://forum.inductiveautomation.com/t/vision-classic-chart-sub-plot/91971 "2024-06-17T19:16:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [June 17, 2024, 7:16pm UTC](https://forum.inductiveautomation.com/t/vision-classic-chart-sub-plot/91971/1 "2024-06-17T19:16:54Z")

</div>

8.1.25

When I create a sub plot in a classic chart, they are appearing side by side not top and bottom. Is it possible to configure for top and bottom sub plots like an easy chart?

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [June 17, 2024, 7:46pm UTC](https://forum.inductiveautomation.com/t/vision-classic-chart-sub-plot/91971/2 "2024-06-17T19:46:40Z")

</div>

Sounds like you've configure "Combined Range" subplots instead of "Combined Domain" subplots.

---

<div class="post-metadata">

**Author:** ![Matrix\_Engineering](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/matrix_engineering/32/19781_2.png) [@Matrix\_Engineering](https://forum.inductiveautomation.com/u/Matrix_Engineering)\
**Post date:** [June 17, 2024, 7:48pm UTC](https://forum.inductiveautomation.com/t/vision-classic-chart-sub-plot/91971/3 "2024-06-17T19:48:25Z")

</div>

Legend (excuse the pun) as always, thanks!