# Vision client windows too big for screen

**URL:** <https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [August 24, 2022, 3:19pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398 "2022-08-24T15:19:58Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![michael.black](https://avatars.discourse-cdn.com/v4/letter/m/ee7513/32.png) [@michael.black](https://forum.inductiveautomation.com/u/michael.black)\
**Post date:** [August 24, 2022, 3:19pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/1 "2022-08-24T15:19:58Z")

</div>

I am running a vision project on a vision client, The right side of all windows are being cut off. I have tried changing the width under project properties/clients/launch with no luck. The size does not change. I did realize that I have it set to launch in full screen mode versus windowed mode and thats probably why changing the width won’t affect anything. If I want it to run in full screen mode how would I make the windows fit the screen?

---

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [August 24, 2022, 3:26pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/2 "2022-08-24T15:26:22Z")

</div>

First, check your component’s layout configuration (right-click on the comp. → Layout). See if they are set to relative or anchored.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [August 24, 2022, 3:29pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/3 "2022-08-24T15:29:16Z")

</div>

Windows have properties for min and max pixel dimensions that limit how much scaling/stretching/shrinking is allowed. Look there.

---

<div class="post-metadata">

**Author:** ![michael.black](https://avatars.discourse-cdn.com/v4/letter/m/ee7513/32.png) [@michael.black](https://forum.inductiveautomation.com/u/michael.black)\
**Post date:** [August 24, 2022, 3:48pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/4 "2022-08-24T15:48:41Z")

</div>

Thanks all. Turned out I just had to adjust a setting on the physical screen and all was good

---

<div class="post-metadata">

**Author:** ![Hamish\_Dodd](https://avatars.discourse-cdn.com/v4/letter/h/73ab20/32.png) [@Hamish\_Dodd](https://forum.inductiveautomation.com/u/Hamish_Dodd)\
**Post date:** [July 9, 2023, 11:33pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/5 "2023-07-09T23:33:24Z")

</div>

I'm very late to the party here, but would you happen to remember what settings you adjusted on the physical screen? Thanks 😄

---

<div class="post-metadata">

**Author:** ![Brian\_Stilson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/brian_stilson/32/73410_2.png) [@Brian\_Stilson](https://forum.inductiveautomation.com/u/Brian_Stilson)\
**Post date:** [March 8, 2024, 7:14pm UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/6 "2024-03-08T19:14:26Z")

</div>

Wasn't me, but I ran into a similar issue. In your Display Settings, there's a Scale settings. On large monitors, especially those with 4k resolution, the default is something over 100%. Like on my monitors it's 150% and on our conference rooms TVs it's even higher. Turns out that scaling feature will also scale up a Vision Client. So the solution is to set your scaling on that monitor to 100%.

---

<div class="post-metadata">

**Author:** ![richardbeardmore](https://avatars.discourse-cdn.com/v4/letter/r/f04885/32.png) [@richardbeardmore](https://forum.inductiveautomation.com/u/richardbeardmore)\
**Post date:** [July 29, 2025, 9:37am UTC](https://forum.inductiveautomation.com/t/vision-client-windows-too-big-for-screen/63398/7 "2025-07-29T09:37:49Z")

</div>

Had an issue if the base screen size was 3840x2160 scaled to 150% if I displayed a popup in Vision Ignition would crash.