# Vision Confirmation default selection

**URL:** <https://forum.inductiveautomation.com/t/vision-confirmation-default-selection/32899>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [March 6, 2020, 8:07pm UTC](https://forum.inductiveautomation.com/t/vision-confirmation-default-selection/32899 "2020-03-06T20:07:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\
**Post date:** [March 6, 2020, 8:07pm UTC](https://forum.inductiveautomation.com/t/vision-confirmation-default-selection/32899/1 "2020-03-06T20:07:05Z")

</div>

When using system.gui.confirm the default selection (focus) is “yes”. Is there any way to change this to “no”?

---

<div class="post-metadata">

**Author:** ![CraigP](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@CraigP](https://forum.inductiveautomation.com/u/CraigP)\
**Post date:** [March 30, 2020, 1:40pm UTC](https://forum.inductiveautomation.com/t/vision-confirmation-default-selection/32899/2 "2020-03-30T13:40:34Z")

</div>

If you use showOptionDialog, the last parameter specifies the default button.

Look at [pphillips](http://forum.inductiveautomation.com/u/pphillips) example:  
[[Prevent pop-up window from closing](http://forum.inductiveautomation.com/t/prevent-pop-up-window-from-closing/15630/2)]

---

<div class="post-metadata">

**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\
**Post date:** [March 31, 2020, 1:11pm UTC](https://forum.inductiveautomation.com/t/vision-confirmation-default-selection/32899/3 "2020-03-31T13:11:12Z")

</div>

Thank you!!