# Vision Easy Chart Historic Mode Date Reset

**URL:** <https://forum.inductiveautomation.com/t/vision-easy-chart-historic-mode-date-reset/115092>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [April 15, 2026, 5:27pm UTC](https://forum.inductiveautomation.com/t/vision-easy-chart-historic-mode-date-reset/115092 "2026-04-15T17:27:15Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jordan\_Brandon](https://avatars.discourse-cdn.com/v4/letter/j/ad7895/32.png) [@Jordan\_Brandon](https://forum.inductiveautomation.com/u/Jordan_Brandon)\
**Post date:** [April 15, 2026, 5:27pm UTC](https://forum.inductiveautomation.com/t/vision-easy-chart-historic-mode-date-reset/115092/1 "2026-04-15T17:27:15Z")

</div>

When moving from a real time easy chart tab to another and then back to the easy chart, the time range is preserved. This is not the case with a historic easy chart. The historic chart date range always resets to startup values when click to another tab then back. How can I configure the historic chart to remember the selected date range?