# Vision Project - User Management Component Bug

**URL:** <https://forum.inductiveautomation.com/t/vision-project-user-management-component-bug/23946>\
**Category:** Ignition Early Access\
**Created:** [April 9, 2019, 2:40am UTC](https://forum.inductiveautomation.com/t/vision-project-user-management-component-bug/23946 "2019-04-09T02:40:18Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![cwaddoups](https://avatars.discourse-cdn.com/v4/letter/c/43a26b/32.png) [@cwaddoups](https://forum.inductiveautomation.com/u/cwaddoups)\
**Post date:** [April 9, 2019, 5:55pm UTC](https://forum.inductiveautomation.com/t/vision-project-user-management-component-bug/23946/3 "2019-04-09T17:55:20Z")

</div>

This sounds very similar to what I spent a few hours working with Kurt Larson on reproducing at the end of last week. It is very repeatable and only happens the second time you open a remote vision client while leaving the client launcher open. Opening the client locks on the initializing page and then once the client launcher is closed it completes launching the project.

> [@\[Bug-13343\]System.util.retarget bug](http://forum.inductiveautomation.com/t/bug-13343-system-util-retarget-bug/23684/8):
>
> On watching task manager during the opening of the clients I noticed some different behavior between retargetting and loading through the client launcher. When I load the project through the client launcher there is an entry under Zulu Platform x64 Architecture which reads ‘Launching’ and then changes to the project name once the project is launched. When retargetting the entry goes straight from one project name to another. Is it possible it is not running the launcher as it should?

---

_[View the full topic](https://forum.inductiveautomation.com/t/vision-project-user-management-component-bug/23946)._