# Vision Property Editor Ignition v8.3

**URL:** <https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911>\
**Category:** Ignition\
**Tags:** vision, ignition83\
**Created:** [December 19, 2025, 11:54am UTC](https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911 "2025-12-19T11:54:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![kroot](https://avatars.discourse-cdn.com/v4/letter/k/b5e925/32.png) [@kroot](https://forum.inductiveautomation.com/u/kroot)\
**Post date:** [December 19, 2025, 11:54am UTC](https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911/1 "2025-12-19T11:54:59Z")

</div>

Hi All,

Does anyone know where the different options for Basic, Advanced, All options on the property editor has gone on the latest version of Vision. I seem to be missing a lot of configurable properties. I'm sure there is ways around it with scripting etc, but they were very convenient.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/d/ed865f75330137d3151b5b559f1bd9e219853741.png)

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [December 19, 2025, 12:04pm UTC](https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911/2 "2025-12-19T12:04:48Z")

</div>

I thought those options went away in 8.3 and always show all props now, but you’re right, that looks like it's missing some stuff.. I haven't used vision for a while

---

<div class="post-metadata">

**Author:** ![brandon1](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@brandon1](https://forum.inductiveautomation.com/u/brandon1)\
**Post date:** [December 19, 2025, 2:24pm UTC](https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911/3 "2025-12-19T14:24:10Z")

</div>

Too bad that went away. That is useful when you want to quickly jump through custom properties using the “basic” filter. I don’t see why they could not have the default be all and let people filter down.

---

<div class="post-metadata">

**Author:** ![bkarabinchak.psi](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bkarabinchak.psi/32/83567_2.png) [@bkarabinchak.psi](https://forum.inductiveautomation.com/u/bkarabinchak.psi)\
**Post date:** [December 19, 2025, 2:47pm UTC](https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911/4 "2025-12-19T14:47:28Z")

</div>

IIRC in another thread someone mentioned they had a lot call in’s / tech support tickets about “where is this property” and it was just because it was on Basic when they needed to be on All. I think it confused people more than it helped and so they did away with it.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [December 19, 2025, 2:50pm UTC](https://forum.inductiveautomation.com/t/vision-property-editor-ignition-v8-3/112911/5 "2025-12-19T14:50:29Z")

</div>

> [@kroot](#):
>
> I seem to be missing a lot of configurable properties.

In v8.3, the property editor is always in "All" mode. If there are component properties missing that were present in v8.1's All mode, that would be a bug. Report any of those.