# Vision window - only vertical scrollbar

**URL:** <https://forum.inductiveautomation.com/t/vision-window-only-vertical-scrollbar/111727>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [October 27, 2025, 8:00am UTC](https://forum.inductiveautomation.com/t/vision-window-only-vertical-scrollbar/111727 "2025-10-27T08:00:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![effeiao](https://avatars.discourse-cdn.com/v4/letter/e/13edae/32.png) [@effeiao](https://forum.inductiveautomation.com/u/effeiao)\
**Post date:** [October 27, 2025, 8:00am UTC](https://forum.inductiveautomation.com/t/vision-window-only-vertical-scrollbar/111727/1 "2025-10-27T08:00:09Z")

</div>

Hello everyone!

I’m trying to create a long scrollable Vision window, what I’d like is to have only the vertical scrollbar visible.

It’s something similar to what was discussed in [this thread](https://forum.inductiveautomation.com/t/make-a-long-scrollable-screen-vision/75840). I’ve tried following the suggestions there, as well as other solutions from both the manual and this forum.

However, both scrollbars still appear, even though the content fits perfectly horizontally, so the horizontal one barely moves and shouldn’t really be there at all.

Is there a way to have only the vertical scrollbar appear?

I’m using Ignition 8.1.43.

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [October 27, 2025, 2:22pm UTC](https://forum.inductiveautomation.com/t/vision-window-only-vertical-scrollbar/111727/2 "2025-10-27T14:22:25Z")

</div>

This thread was for a popup, but the same method should apply.

> [@Remove scrollbar from a popup window (Vision)](https://forum.inductiveautomation.com/t/remove-scrollbar-from-a-popup-window-vision/30427/15):
>
> SOLVED!!

---

<div class="post-metadata">

**Author:** ![effeiao](https://avatars.discourse-cdn.com/v4/letter/e/13edae/32.png) [@effeiao](https://forum.inductiveautomation.com/u/effeiao)\
**Post date:** [October 27, 2025, 2:46pm UTC](https://forum.inductiveautomation.com/t/vision-window-only-vertical-scrollbar/111727/3 "2025-10-27T14:46:42Z")

</div>

It works! Thank you!