# VM Ignition Set Up **URL:** \ **Category:** General Discussion\ **Created:** [June 8, 2026, 2:44pm UTC](https://forum.inductiveautomation.com/t/vm-ignition-set-up/115890 "2026-06-08T14:44:58Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![joshua.showalter](https://avatars.discourse-cdn.com/v4/letter/j/9de053/32.png) [@joshua.showalter](https://forum.inductiveautomation.com/u/joshua.showalter)\ **Post date:** [June 8, 2026, 2:44pm UTC](https://forum.inductiveautomation.com/t/vm-ignition-set-up/115890/1 "2026-06-08T14:44:58Z")
Are there any existing guides or resources for setting up Ignition on a VM that can be shared? ---
**Author:** ![Sfenwick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/sfenwick/32/82355_2.png) [@Sfenwick](https://forum.inductiveautomation.com/u/Sfenwick)\ **Post date:** [June 8, 2026, 3:46pm UTC](https://forum.inductiveautomation.com/t/vm-ignition-set-up/115890/2 "2026-06-08T15:46:41Z")
There shouldn't be any issues with setting this up on a VM. A sales rep might be the best person to ask, as they could tailor questions a bit better. [Here's some information on resources and general configuration](https://inductiveautomation.com/resources/article/ignition-server-sizing-and-architecture-guide?utm_term=&utm_campaign=002+Ignition+Performance+Max&utm_source=adwords&utm_medium=ppc&hsa_acc=1942977828&hsa_cam=19829025962&hsa_grp=&hsa_ad=&hsa_src=x&hsa_tgt=&hsa_kw=&hsa_mt=&hsa_net=adwords&hsa_ver=3&gad_source=1&gad_campaignid=23583292763&gbraid=0AAAAAD-80zjCc2ynTXxL14XqHIq-3rZRq&gclid=Cj0KCQjw0JnRBhDJARIsALobnXbuYGqCyxKmLhjucEGB-rAXYfTsqtqUhN-zFA_IV8R6uLqJA94wTJwaAqXuEALw_wcB) ---
**Author:** ![Steve\_Laubach](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/steve_laubach/32/60900_2.png) [@Steve\_Laubach](https://forum.inductiveautomation.com/u/Steve_Laubach)\ **Post date:** [June 8, 2026, 6:40pm UTC](https://forum.inductiveautomation.com/t/vm-ignition-set-up/115890/3 "2026-06-08T18:40:09Z")
General system specs can be found here. Note the section about half way down regarding VM deployments. > **[Ignition Server Sizing and Architecture Guide](https://inductiveautomation.com/resources/article/ignition-server-sizing-and-architecture-guide)** > > This guide is intended to provide some tips to help you determine the correct architecture depending on your requirements. It is important to note that any architecture that you come up with needs to be fully tested and verified. Throughout that... ---
**Author:** ![joshua.showalter](https://avatars.discourse-cdn.com/v4/letter/j/9de053/32.png) [@joshua.showalter](https://forum.inductiveautomation.com/u/joshua.showalter)\ **Post date:** [June 9, 2026, 1:06pm UTC](https://forum.inductiveautomation.com/t/vm-ignition-set-up/115890/4 "2026-06-09T13:06:00Z")
Thank you!