# Webinar examples

**URL:** <https://forum.inductiveautomation.com/t/webinar-examples/4938>\
**Category:** Ignition\
**Created:** [August 7, 2012, 4:22am UTC](https://forum.inductiveautomation.com/t/webinar-examples/4938 "2012-08-07T04:22:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tailfire](https://avatars.discourse-cdn.com/v4/letter/t/b5a626/32.png) [@tailfire](https://forum.inductiveautomation.com/u/tailfire)\
**Post date:** [August 7, 2012, 4:22am UTC](https://forum.inductiveautomation.com/t/webinar-examples/4938/1 "2012-08-07T04:22:06Z")

</div>

I was watching the spc webinar and I was wanting to know if any of the projects in that webinar are available  
to download? Also since that webinar has the cp and cpk been incorporated in a release?  
I feel I have typed webinar too many times in this post… 😒

---

<div class="post-metadata">

**Author:** ![thechtman](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@thechtman](https://forum.inductiveautomation.com/u/thechtman)\
**Post date:** [August 7, 2012, 2:53pm UTC](https://forum.inductiveautomation.com/t/webinar-examples/4938/2 "2012-08-07T14:53:18Z")

</div>

The SPC Demo is included with the SPC Install module. After installing the SPC Installer module there is a “Quality Demo” link under the MES Modules section in the Gateway Configuration page.

I recommend using version 1.5.2.319-beta1 of after of the SPC Installer module.

Yes, process capability and process performance charts have been added.