# Webpage and project different ports

**URL:** <https://forum.inductiveautomation.com/t/webpage-and-project-different-ports/7100>\
**Category:** Ignition\
**Created:** [August 21, 2013, 11:06am UTC](https://forum.inductiveautomation.com/t/webpage-and-project-different-ports/7100 "2013-08-21T11:06:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![quper](https://avatars.discourse-cdn.com/v4/letter/q/aeb1de/32.png) [@quper](https://forum.inductiveautomation.com/u/quper)\
**Post date:** [August 21, 2013, 11:06am UTC](https://forum.inductiveautomation.com/t/webpage-and-project-different-ports/7100/1 "2013-08-21T11:06:13Z")

</div>

Is it possible to assign different ports for ignition page and project?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [August 21, 2013, 3:18pm UTC](https://forum.inductiveautomation.com/t/webpage-and-project-different-ports/7100/2 "2013-08-21T15:18:17Z")

</div>

I’m not 100% sure what you mean - but you can change the port Ignition runs on from the GCU to something other than 8088.

You can’t, however, have one part of the gateway running on 8088 and another part running on a different port.