# Week View Display

**URL:** <https://forum.inductiveautomation.com/t/week-view-display/9369>\
**Category:** Ignition\
**Created:** [November 21, 2014, 7:25pm UTC](https://forum.inductiveautomation.com/t/week-view-display/9369 "2014-11-21T19:25:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![scicco](https://avatars.discourse-cdn.com/v4/letter/s/e0b2c6/32.png) [@scicco](https://forum.inductiveautomation.com/u/scicco)\
**Post date:** [November 21, 2014, 7:25pm UTC](https://forum.inductiveautomation.com/t/week-view-display/9369/1 "2014-11-21T19:25:06Z")

</div>

Hello,

I am trying to use the Week View control to display the state of a production line. This would be the same basic concept as the Status Chart but hopefully easier to correlate to dates. I don’t know if there is anything that can be done but for smaller time spans it is varying the width of the event. Ideally I’d like there to be no white space in between events. Has anyone run into this or have any suggestions?

Thanks in advance -

Steve

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/8/8913a49d33d52b480213162c568055c0bf4f81ec.png)

---

<div class="post-metadata">

**Author:** ![scicco](https://avatars.discourse-cdn.com/v4/letter/s/e0b2c6/32.png) [@scicco](https://forum.inductiveautomation.com/u/scicco)\
**Post date:** [December 3, 2014, 7:57pm UTC](https://forum.inductiveautomation.com/t/week-view-display/9369/2 "2014-12-03T19:57:25Z")

</div>

**bump** 🙂

If this is default behavior I’d like to know because I’m also experiencing differences in the mouseDragged event depending on whether or not it’s over white space or an event.