# What causes "Alarm property model initialized."? (v8.1.18)

**URL:** <https://forum.inductiveautomation.com/t/what-causes-alarm-property-model-initialized-v8-1-18/63561>\
**Category:** Ignition\
**Created:** [August 29, 2022, 12:23pm UTC](https://forum.inductiveautomation.com/t/what-causes-alarm-property-model-initialized-v8-1-18/63561 "2022-08-29T12:23:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![edward.fowler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/edward.fowler/32/24179_2.png) [@edward.fowler](https://forum.inductiveautomation.com/u/edward.fowler)\
**Post date:** [August 29, 2022, 12:23pm UTC](https://forum.inductiveautomation.com/t/what-causes-alarm-property-model-initialized-v8-1-18/63561/1 "2022-08-29T12:23:18Z")

</div>

I was reviewing the logs and found dozens of entries relating to alarms (comm loss) configured for DNP3 devices (39 of them) using `[System]Gateway/Devices/{DeviceName}/Status != "Connected"`.  
The logs have 1000’s of diagnostic entries for all the devices with the following in the messages. Oh, and yes, every entry has the same time stamp.

- Alarm property model initialized.
- Registered live event ‘32409332-3f7b-44fd-a0be-837dc4cc47aa’, state: Cleared, Unacknowledged. Outstanding events: 1
- The transition to Clear will be marked as an ‘initial event’.
- Alarm release

How do I make sense of this? Why would the alarm property model be initialized?

Thanks you.

---

<div class="post-metadata">

**Author:** ![Ayanna\_Brown](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ayanna_brown/32/38406_2.png) [@Ayanna\_Brown](https://forum.inductiveautomation.com/u/Ayanna_Brown)\
**Post date:** [September 7, 2022, 9:13pm UTC](https://forum.inductiveautomation.com/t/what-causes-alarm-property-model-initialized-v8-1-18/63561/2 "2022-09-07T21:13:58Z")

</div>

What is the name of the logger that is making these entries? Can you please post the full stack trace? Do you have replication steps for this behavior?

---

<div class="post-metadata">

**Author:** ![edward.fowler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/edward.fowler/32/24179_2.png) [@edward.fowler](https://forum.inductiveautomation.com/u/edward.fowler)\
**Post date:** [September 8, 2022, 10:57am UTC](https://forum.inductiveautomation.com/t/what-causes-alarm-property-model-initialized-v8-1-18/63561/3 "2022-09-08T10:57:46Z")

</div>

Hi Ayanna,  
It looks like its the Execution logger. There is no stack trace. No, I don’t know how to replicate the behavior…it just showed up. And I haven’t seen (looked with filter) one since Aug. 28th.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/8/d82a0203457022db7c043397ede8bcd374864455.png)