# What do red resize handles mean in vision designer **URL:** \ **Category:** Ignition\ **Created:** [August 7, 2020, 1:49pm UTC](https://forum.inductiveautomation.com/t/what-do-red-resize-handles-mean-in-vision-designer/37501 "2020-08-07T13:49:25Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![dirk1](https://avatars.discourse-cdn.com/v4/letter/d/977dab/32.png) [@dirk1](https://forum.inductiveautomation.com/u/dirk1)\ **Post date:** [August 7, 2020, 1:49pm UTC](https://forum.inductiveautomation.com/t/what-do-red-resize-handles-mean-in-vision-designer/37501/1 "2020-08-07T13:49:25Z")
I’m guessing these are trying to tell me something important since my navigate button does not work. Assumed it meant I was outside some sort of boundary, but shrinking component didn’t help. ---
**Author:** ![zacht](https://avatars.discourse-cdn.com/v4/letter/z/ea5d25/32.png) [@zacht](https://forum.inductiveautomation.com/u/zacht)\ **Post date:** [August 7, 2020, 2:36pm UTC](https://forum.inductiveautomation.com/t/what-do-red-resize-handles-mean-in-vision-designer/37501/2 "2020-08-07T14:36:40Z")
They indicate that the component is using an anchored layout. Right click and select layout or push Ctrl+L when the component is selected to see this dialog box. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/d/5d5fcc547be804659270e5b339a80e4cfe4f1b1c.png) Switching the component to Relative mode will change the resize handles to grey, but I can’t imagine that will fix your button. ---
**Author:** ![dirk1](https://avatars.discourse-cdn.com/v4/letter/d/977dab/32.png) [@dirk1](https://forum.inductiveautomation.com/u/dirk1)\ **Post date:** [August 7, 2020, 3:02pm UTC](https://forum.inductiveautomation.com/t/what-do-red-resize-handles-mean-in-vision-designer/37501/3 "2020-08-07T15:02:33Z")
Thank you. Just grasping at straws, here. One of these days, I’ll have enough to make a bale.