# Where to check system.util.getLogger

**URL:** <https://forum.inductiveautomation.com/t/where-to-check-system-util-getlogger/16220>\
**Category:** Ignition\
**Created:** [December 5, 2017, 5:23pm UTC](https://forum.inductiveautomation.com/t/where-to-check-system-util-getlogger/16220 "2017-12-05T17:23:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sarathtumuluri](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@sarathtumuluri](https://forum.inductiveautomation.com/u/sarathtumuluri)\
**Post date:** [December 5, 2017, 5:23pm UTC](https://forum.inductiveautomation.com/t/where-to-check-system-util-getlogger/16220/1 "2017-12-05T17:23:09Z")

</div>

Hello Everyone, i really dont understand where should i check the logs information that i am trying to track of errors in gateway script, help ASAP will be appreciated.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [December 5, 2017, 6:29pm UTC](https://forum.inductiveautomation.com/t/where-to-check-system-util-getlogger/16220/2 "2017-12-05T18:29:37Z")

</div>

In the gateway web interface, in the Status section, under “Logs”. Loggers have configurable levels – if you are using .debug() or .trace() methods, you’ll have to enable those levels for your logger name.

---

<div class="post-metadata">

**Author:** ![sarathtumuluri](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@sarathtumuluri](https://forum.inductiveautomation.com/u/sarathtumuluri)\
**Post date:** [December 5, 2017, 8:25pm UTC](https://forum.inductiveautomation.com/t/where-to-check-system-util-getlogger/16220/3 "2017-12-05T20:25:22Z")

</div>

Got it, thanks a lot.