# Window/component scaling **URL:** \ **Category:** Ignition\ **Tags:** ignition81, vision\ **Created:** [August 20, 2025, 10:00pm UTC](https://forum.inductiveautomation.com/t/window-component-scaling/110005 "2025-08-20T22:00:54Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![carter.doud](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@carter.doud](https://forum.inductiveautomation.com/u/carter.doud)\ **Post date:** [August 20, 2025, 10:00pm UTC](https://forum.inductiveautomation.com/t/window-component-scaling/110005/1 "2025-08-20T22:00:54Z")
Total noob at ignition still, but finishing up my first project. I have been designing in a 16:9 aspect ratio and now want to be able to port that to various screen sizes while scaling the window exactly as I have it in designer. I’ve been designing in 1200x675 but will be using various screens of various sizes. I think it may have been somewhere in the university videos, but can’t seem to find it. How can I get my screen to scale linearly without components moving around when switching to various screen sizes? ---
**Author:** ![carter.doud](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@carter.doud](https://forum.inductiveautomation.com/u/carter.doud)\ **Post date:** [August 20, 2025, 10:05pm UTC](https://forum.inductiveautomation.com/t/window-component-scaling/110005/2 "2025-08-20T22:05:56Z")
a little more info, after looking at it a bit more, it does scale, but I am using a template repeater to repeat a template 10 times, those templates inside of the repeater do not scale. Is there any way to make them scale with the screen size ---
**Author:** ![carter.doud](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@carter.doud](https://forum.inductiveautomation.com/u/carter.doud)\ **Post date:** [August 20, 2025, 10:22pm UTC](https://forum.inductiveautomation.com/t/window-component-scaling/110005/4 "2025-08-20T22:22:32Z")
![Screenshot 2025-08-20 152108](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/7/e790fe746badaae2fde4487152384519b66f854d.png) ![Screenshot 2025-08-20 152134](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/2/4260eaa505f0b7a4163fa3e50edd135f8277c454.png) here are some photos of my project. As you can see, the layout in the first photo is what I want, then the bounds of the template repeater scale, but the templates don’t ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [August 20, 2025, 11:10pm UTC](https://forum.inductiveautomation.com/t/window-component-scaling/110005/5 "2025-08-20T23:10:03Z")
Set the repeater component to use anchored layout, so it stays "glued" to the outer edges of its parent container. > **[Working with Vision Components | Ignition User Manual](https://www.docs.inductiveautomation.com/docs/8.1/ignition-modules/vision/working-with-vision-components#component-layout)** > > The Vision Module comes with a host of built-in components that you can select from for use in your project. One thing that you'll find when working with components is there are a few different ways to manipulate and layout components on a window... ---
**Author:** ![carter.doud](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@carter.doud](https://forum.inductiveautomation.com/u/carter.doud)\ **Post date:** [August 20, 2025, 11:30pm UTC](https://forum.inductiveautomation.com/t/window-component-scaling/110005/6 "2025-08-20T23:30:06Z")
thank you!