# Wonderware Memory Message

**URL:** <https://forum.inductiveautomation.com/t/wonderware-memory-message/15335>\
**Category:** Ignition\
**Created:** [September 13, 2017, 10:29pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335 "2017-09-13T22:29:39Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Derekr](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/derekr/32/4945_2.png) [@Derekr](https://forum.inductiveautomation.com/u/Derekr)\
**Post date:** [September 13, 2017, 10:29pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335/1 "2017-09-13T22:29:39Z")

</div>

I need to get the value from a Memory Message from a Wonderware Intouch app into an Ignition tag. Is there any way to do this?

---

<div class="post-metadata">

**Author:** ![Kevin.Collins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.collins/32/13497_2.png) [@Kevin.Collins](https://forum.inductiveautomation.com/u/Kevin.Collins)\
**Post date:** [September 14, 2017, 7:16pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335/2 "2017-09-14T19:16:13Z")

</div>

Should be able to get this done via FSGateway (or OI Gateway in newer versions) and the Ignition OPC-COM Module to offer up Intouch tags view OPC and connect to FSGateway from Ignition.

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/8/8a81b7f21dd82625e70a13846cd9656a513c3d05.png)

---

<div class="post-metadata">

**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\
**Post date:** [June 24, 2020, 1:02pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335/3 "2020-06-24T13:02:04Z")

</div>

Was this solution used to pull the values successfully? I know this was a long time ago but I am looking to do something similar.

---

<div class="post-metadata">

**Author:** ![Kevin.Collins](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.collins/32/13497_2.png) [@Kevin.Collins](https://forum.inductiveautomation.com/u/Kevin.Collins)\
**Post date:** [June 24, 2020, 1:03pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335/4 "2020-06-24T13:03:47Z")

</div>

I don’t know that I actually ever _had_ to do this, so I can’t report on specific success… I think some of the newer OI Gateway features actually include an OPC-UA Server, so it might be even easier now. That is relatively new though I think with the System Platform 2020 release, haven’t looked into it just yet, just reviewed some release notes.

---

<div class="post-metadata">

**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\
**Post date:** [June 24, 2020, 1:30pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335/5 "2020-06-24T13:30:39Z")

</div>

I want to say kepware or matrikon has a opc server that can be used to connect to intouch tags.

---

<div class="post-metadata">

**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\
**Post date:** [June 30, 2020, 1:41pm UTC](https://forum.inductiveautomation.com/t/wonderware-memory-message/15335/6 "2020-06-30T13:41:54Z")

</div>

Thank you for your input. I found that I could just re-direct the WW Memory message to a PLC tag and then we did some more re-direction in the background. Not what I wanted to do but for only 2 tags, it was the best choice.  
Thanks again for your replies.