# Workstations with google maps

**URL:** <https://forum.inductiveautomation.com/t/workstations-with-google-maps/31589>\
**Category:** Ignition\
**Created:** [January 24, 2020, 12:28pm UTC](https://forum.inductiveautomation.com/t/workstations-with-google-maps/31589 "2020-01-24T12:28:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lachguerabdallah](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lachguerabdallah/32/25558_2.png) [@lachguerabdallah](https://forum.inductiveautomation.com/u/lachguerabdallah)\
**Post date:** [January 24, 2020, 12:28pm UTC](https://forum.inductiveautomation.com/t/workstations-with-google-maps/31589/1 "2020-01-24T12:28:32Z")

</div>

Hello everyone, I have several stations, and for each station I have its corresponding Scada, how can I insert a google maps map and interact with it to search for those stations? Thank you very much.

---

<div class="post-metadata">

**Author:** ![RadicalRumin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/radicalrumin/32/11543_2.png) [@RadicalRumin](https://forum.inductiveautomation.com/u/RadicalRumin)\
**Post date:** [January 24, 2020, 3:12pm UTC](https://forum.inductiveautomation.com/t/workstations-with-google-maps/31589/2 "2020-01-24T15:12:31Z")

</div>

Assuming you know the locations of the stations it shouldn’t be too hard to use Kymera’s third party map module.  
[https://inductiveautomation.com/moduleshowcase/module/kymera-systems-inc-kymera-map-panel-module](https://inductiveautomation.com/moduleshowcase/module/kymera-systems-inc-kymera-map-panel-module)  
It doesn’t use google maps however, instead it uses OpenStreetMaps, but those are practically the same in most integrated use cases.

---

<div class="post-metadata">

**Author:** ![PRAMANJ](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pramanj/32/66935_2.png) [@PRAMANJ](https://forum.inductiveautomation.com/u/PRAMANJ)\
**Post date:** [January 24, 2020, 4:03pm UTC](https://forum.inductiveautomation.com/t/workstations-with-google-maps/31589/3 "2020-01-24T16:03:34Z")

</div>

Didn't quite understand your requirements, but we have a google-maps based geo-location tracking module for Ignition, if it makes any sense to your requirements! [https://youtu.be/WXITQdOxPZw](https://youtu.be/WXITQdOxPZw)