# Worlds Cheapest NAT Router. Will it work? Wire-shark Capture

**URL:** <https://forum.inductiveautomation.com/t/worlds-cheapest-nat-router-will-it-work-wire-shark-capture/28621>\
**Category:** Ignition\
**Created:** [September 27, 2019, 1:35pm UTC](https://forum.inductiveautomation.com/t/worlds-cheapest-nat-router-will-it-work-wire-shark-capture/28621 "2019-09-27T13:35:36Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [May 27, 2020, 5:31pm UTC](https://forum.inductiveautomation.com/t/worlds-cheapest-nat-router-will-it-work-wire-shark-capture/28621/18 "2020-05-27T17:31:35Z")

</div>

After seeing this thread, how did the Ubiquiti units work out?

> [@Connecting PLCs with the same IP address](http://forum.inductiveautomation.com/t/connecting-plcs-with-the-same-ip-address/35082):
>
> Hi all, Ignition 8.04, Windows 10 KEPWARE Server 6.8 Task: to connect 6 PLC ELAU C400 that have the same IP address (and it cannot be changed). Connecting one PLC to the PC has no issues. What needs to be done in case when multiple devices with the same IP address must be connected? Someone to share experience?

---

_[View the full topic](https://forum.inductiveautomation.com/t/worlds-cheapest-nat-router-will-it-work-wire-shark-capture/28621)._