# Wyze Cam v2 Integration **URL:** \ **Category:** Maker\ **Created:** [July 2, 2020, 1:17am UTC](https://forum.inductiveautomation.com/t/wyze-cam-v2-integration/36277 "2020-07-02T01:17:12Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![simada](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@simada](https://forum.inductiveautomation.com/u/simada)\ **Post date:** [July 2, 2020, 1:17am UTC](https://forum.inductiveautomation.com/t/wyze-cam-v2-integration/36277/1 "2020-07-02T01:17:12Z")
Hi all! Familiar “regular” ignition user here just getting things set up on Maker Edition. Does anyone have information on how to integrate Wyze Cam v2 with Ignition? I have tried a few methods such as converting RTSP streams and also connecting directly to the IP but none of this has worked. Any help would be very much appreciated! Thanks! ---
**Author:** ![jonathan.taylor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jonathan.taylor/32/4048_2.png) [@jonathan.taylor](https://forum.inductiveautomation.com/u/jonathan.taylor)\ **Post date:** [July 2, 2020, 9:00am UTC](https://forum.inductiveautomation.com/t/wyze-cam-v2-integration/36277/2 "2020-07-02T09:00:39Z")
Doesn’t look like they have any public API, and from the looks of this link you will have to install new firmware to enable RTSP: > **[Wyze Cam RTSP](https://support.wyze.com/hc/en-us/articles/360026245231-Wyze-Cam-RTSP)** > > RTSP is not a stock feature with the Wyze Cam and is a beta feature that requires the installation of different firmware.  Using the RTSP firmware will prevent the camera from supporting any future... Then I think its a case of using the following format to get the stream: rtsp://username:password@ipaddress/live ---
**Author:** ![simada](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@simada](https://forum.inductiveautomation.com/u/simada)\ **Post date:** [July 3, 2020, 1:56am UTC](https://forum.inductiveautomation.com/t/wyze-cam-v2-integration/36277/3 "2020-07-03T01:56:51Z")
I have tried that and am able to connect via VLC, but cannot connect via Perspective Video Player. Anyone have a simple path to bridge the two? Thanks! ---
**Author:** ![jonathan.taylor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jonathan.taylor/32/4048_2.png) [@jonathan.taylor](https://forum.inductiveautomation.com/u/jonathan.taylor)\ **Post date:** [July 3, 2020, 1:31pm UTC](https://forum.inductiveautomation.com/t/wyze-cam-v2-integration/36277/4 "2020-07-03T13:31:09Z")
Looks like the component/browser doesn't support RTSP: > [@Video Player Component](http://forum.inductiveautomation.com/t/video-player-component/28900/5): > > Yes, Direct RTSP streaming seem not being supported by browsers…:sob: ---
**Author:** ![Kevin.McClusky](https://avatars.discourse-cdn.com/v4/letter/k/47e85d/32.png) [@Kevin.McClusky](https://forum.inductiveautomation.com/u/Kevin.McClusky)\ **Post date:** [July 6, 2020, 6:16am UTC](https://forum.inductiveautomation.com/t/wyze-cam-v2-integration/36277/5 "2020-07-06T06:16:27Z")
One option from the RTSP might be on-the-fly transcoding using vlc. [https://ipcamtalk.com/threads/how-to-use-vlc-to-transcode-ip-video-to-an-html5-compatible-format.1371/](https://ipcamtalk.com/threads/how-to-use-vlc-to-transcode-ip-video-to-an-html5-compatible-format.1371/) Note that the original poster in that link was only able to go to Ogg Theora. Browser support for this format is a little more limited than h.264: [https://caniuse.com/#feat=ogv](https://caniuse.com/#feat=ogv) The post was created 6 years ago, so it’s possible on the fly transcoding can now go to h.264, which has even better support across browsers. If you give this route a shot, let us know if you have any success! I haven’t had the opportunity to try this myself.