# XY Chart Question - Production vs Target

**URL:** <https://forum.inductiveautomation.com/t/xy-chart-question-production-vs-target/105618>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [April 28, 2025, 2:03am UTC](https://forum.inductiveautomation.com/t/xy-chart-question-production-vs-target/105618 "2025-04-28T02:03:55Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [April 28, 2025, 2:02pm UTC](https://forum.inductiveautomation.com/t/xy-chart-question-production-vs-target/105618/5 "2025-04-28T14:02:21Z")

</div>

That's fine. Just edit your original post and change 'report' to 'view' to avoid confusion.

I think you might get a more meaningful infographic if you just add a dot or bar above each bar to represent the target. A line represents a trend but you're not trying to show a trend.

If you're still in bother then copy and paste the chart (from the Project Browser) in here and format it as shown in [Wiki - how to post code on this forum](https://forum.inductiveautomation.com/t/wiki-how-to-post-code-on-this-forum/77831). If your data comes from a binding then we'll need you to post the data too in the same manner (but from the Perspective Property Editor).

---

_[View the full topic](https://forum.inductiveautomation.com/t/xy-chart-question-production-vs-target/105618)._