# Y-Axis Labels on Click to Graph

**URL:** <https://forum.inductiveautomation.com/t/y-axis-labels-on-click-to-graph/12059>\
**Category:** Ignition\
**Created:** [August 23, 2016, 6:41pm UTC](https://forum.inductiveautomation.com/t/y-axis-labels-on-click-to-graph/12059 "2016-08-23T18:41:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DougSN](https://avatars.discourse-cdn.com/v4/letter/d/a9adbd/32.png) [@DougSN](https://forum.inductiveautomation.com/u/DougSN)\
**Post date:** [August 23, 2016, 6:41pm UTC](https://forum.inductiveautomation.com/t/y-axis-labels-on-click-to-graph/12059/1 "2016-08-23T18:41:35Z")

</div>

I have a pen set up in Click to Graph which displays the fault code of a device. On the device’s display screen, I have it showing the user readable name of the fault (Load, Run, Bad Config, etc.), which is pulled from a lookup table. Is there a way to display these user readable names as the y-axis labels on the Click to Graph chart screen, instead of the numeric fault code?

I tried setting up a view in the database and pointing the pen to the label column, but it didn’t display the data on the chart when I did that, it was just blank.

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [August 24, 2016, 5:25pm UTC](https://forum.inductiveautomation.com/t/y-axis-labels-on-click-to-graph/12059/2 "2016-08-24T17:25:29Z")

</div>

Yes, it is possible. You’ll need to set up a Symbol axis. Take a look at this page for the Easy Chart for more info:  
[docs.inductiveautomation.com/di … art±+Axes](https://docs.inductiveautomation.com/display/DOC/Easy+Chart+-+Axes)  
(in the “Symbol Axis Type Example” section)